sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 183 |
| Poids du tir | g | 167 |
| Vitesse de tir | mm/s | 350 |
| Diamètre de la vis | mm | 36 |
| Pression d'injection | MPa | 248 |
| Rapport L:D de vis | -- | 23.3 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 1700 |
| Coup d'ouverture | mm | 450 |
| Espace entre les barres de liaison | mm x mm | 520 x 520 |
| Épaisseur du moule(min) | mm | 160 |
| Épaisseur du moule(max) | mm | 520 |
| Course d'éjection hydraulique | mm | 120 |
| Force d'éjection hydraulique | kN | 30 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 42 |
| Capacité de chauffage | kW | 0 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 0 |
Machine Dimension
Platen Dimension
What Would be a Preferable Mould Layout Design for a Petri Dish Packing System?
SWITEK is now providing two kinds of solutions for Petri dish packing, one is a packing system with top entry picking robot and the other is a system with a side entry picking robot. The petri dish producer can decide which solutions is better according to the layout design of the workshop.
Traditionally the mould layout design for the Petri dish production will have the top and base integrated into the same mould which could be 2 + 2, 4 + 4 or 8 + 8 with the cover to the top of the mould. The cover on top design is preferable to an automation system of Petri dish packing.
For an automation system of Petri dish packing, the best is to have a turn-key solutions of Petri dish packing of which SWITEK will have the whole system well tested before delivery to ensure that the automation system which you received is a ready to work one to reduce the cost of sytem start up.
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
