sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unité | Valeur |
|---|---|---|
| UNITÉ D'INJECTION | ||
| Volume de tir | cm3 | 397 |
| Poids du tir | g | 362 |
| Vitesse de tir | mm/s | 196 |
| Diamètre de la vis | mm | 45 |
| Pression d'injection | MPa | 228 |
| Rapport L:D de vis | -- | 23.5 |
| UNITÉ DE SERRAGE | ||
| Force de serrage | kN | 1780 |
| Coup d'ouverture | mm | 450 |
| Espace entre les barres de liaison | mm x mm | 485 x 465 |
| Épaisseur du moule(min) | mm | 180 |
| Épaisseur du moule(max) | mm | 520 |
| Course d'éjection hydraulique | mm | 130 |
| Force d'éjection hydraulique | kN | 70 |
| UNITÉ DE PUISSANCE | ||
| Moteur de pompe | kW | 19 |
| Capacité de chauffage | kW | 16.3 |
| GÉNÉRAL | ||
| Capacité du réservoir d'huile | L | 220 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 5900 mm |
| B | 3000 mm |
| C | 595 mm |
| D | 370 mm |
| E | 60 mm |
| F | 1750 mm |
| G | 1100 mm |
| H | 1150 mm |
| I | 724 mm |
| J | 2100 mm |
| K | 4220 mm |
| L | 1740 mm |
| M | 950 mm |
| N | 990 mm |
| O | 1430 mm |
Why is BOLE BL530EKH an Ideal Injection Molding Machine for 20L IML Paints Pails Project?
BL530EKH is a hydraulic servo energy saving injection molding machine with a clamping force of 5300kN with BOLE central clamping toggle technology, which will have a higher clamping force efficiency against traditional edge clamping force and can save 2~5% material. But, the most attractive feature of this machine to an IML Paint Buckets projector is its opening stroke: 850mm.
For any IML projectors of 20L IML paint buckets the opening stroke is very important to compose an IML system economically. With an opening stroke of 850mm it means that this BL530EKH is suitable for the IML production of most paint buckets with a height < 350mm. It'll have most of the 20L paint buckets included. Compared to its counter part of which mostly would be injection molding machine > 600T, it would be a big budget saving.
Anyway before any decision made about the which injection molding machine to choose for your IML project, the right process would be to provide the sample or 3D drawing of the paint bucket of which you want to produce so SWITEK engineer will evaluate it and make a professional advisory accordingly. If you still have any question about IML paint buckets production please feel free to contact Adams from SWITEK for a budget smart solutions of IML.
Actualités sur l'automatisation de l'injection à chaud
E-mail: sales@switek.biz
Contacter le blogueur
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
