Machine de moulage par injection

Description	Unité	Valeur
Volume de tir	cm³	829
Poids du tir	g	754
Vitesse de tir	mm/s	160
Diamètre de la vis	mm	65
Pression d'injection	MPa	132
Rapport L:D de vis	--	20.3
UNITÉ DE SERRAGE
Force de serrage	kN	2380
Coup d'ouverture	mm	520
Espace entre les barres de liaison	mm x mm	530 x 530
Épaisseur du moule(min)	mm	200
Épaisseur du moule(max)	mm	580
Course d'éjection hydraulique	mm	150
Force d'éjection hydraulique	kN	70
UNITÉ DE PUISSANCE
Moteur de pompe	kW	22
Capacité de chauffage	kW	24.7
GÉNÉRAL
Capacité du réservoir d'huile	L	240

Description

Unité

Valeur

UNITÉ D'INJECTION

Volume de tir

cm³

829

Poids du tir

754

Vitesse de tir

mm/s

160

Diamètre de la vis

Pression d'injection

MPa

132

Rapport L:D de vis

20.3

UNITÉ DE SERRAGE

Force de serrage

2380

Coup d'ouverture

520

Espace entre les barres de liaison

mm x mm

530 x 530

Épaisseur du moule(min)

200

Épaisseur du moule(max)

580

Course d'éjection hydraulique

150

Force d'éjection hydraulique

UNITÉ DE PUISSANCE

Moteur de pompe

Capacité de chauffage

24.7

GÉNÉRAL

Capacité du réservoir d'huile

240

#	Value
A	6200 mm
B	3270 mm
C	650 mm
D	405 mm
E	60 mm
F	1900 mm
G	1330 mm
H	1340 mm
I	764 mm
J	2200 mm
K	4690 mm
L	1840 mm
M	1010 mm
N	1050 mm
O	1470 mm

Value

6200 mm

3270 mm

650 mm

405 mm

60 mm

1900 mm

1330 mm

1340 mm

764 mm

2200 mm

4690 mm

1840 mm

1010 mm

1050 mm

1470 mm

Q & A

What Would be a SWITEK Turn-key 8 Cavities silicone Cartridge Tubes Side Entry IML Solutions Include?

With the advancement of the IML technology, more and more silicone cartridge producers choose to have an IML silicone cartridge tubes as the subsitution of the traditional off print silicone cartridge tubes. With an IML solutions, the silicone cartridge tubes producer will be able to produce an IML silicone cartridge tubes immediately after the injection process.

8 Cavities silicone Cartridge Tubes Side Entry IML Solution

Generally for one set of silicone cartridge tubes there are 3 parts, the body of the silicone tube,the caps for the repeat use of the silicone sealant and the bottom block which you can push the sealant out. So for a standard turn-key IML solutions of an 8 cavities silicone cartridge tubes SWITEK will provide:

Side entry IML Robot with 8 cavities magazine + EOAT Sets for IML production of silicone cartridge tubes.
8 Cavities hot runner mold for silliocne cartridge tubes body. The injection molding machine to recommend for this part would be YIZUMI UN350A5-EU high end servo injection molding machine, HAIDA HD330L servo injection molding machine and HaiTian MA3800 servo injection molding machine.
16 Cavities hot runner mold for bottom block. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
32 Cavities hot runner mold for caps. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.

For the injection molding machine the silicone cartridge producer can choose to buy from the local distributors or have SWITEK to buy it as part of the turn-key IML solutions.

For more information about a turn-key IML solution for Silicone cartridge tube please feel free to contact Adams from SWITEK Automation for a professional proposal of a ready to work IML system for IML Silicone cartridge production.

U238TS- C Servo Machine de moulage par injection

Spécification de la machine

Dimensions de la machine

Q & A