Injection Molding Machine

Description	Unit	Value
Shot volume	cm³	913
Shot weight	g	830
Shot speed	mm/s	800
Screw diameter	mm	65
Injection pressure	MPa	167
Screw L:D ratio	--	22.7:1
CLAMPING UNIT
Clamping force	kN	5000
Opening Stroke	mm	720
Space between tie bars	mm x mm	780 x 780
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	182
POWER UNIT
Pump motor	kW	77
Heating capacity	kW	36.9
GENERAL
Oil tank capacity	L	655

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

913

Shot weight

830

Shot speed

mm/s

800

Screw diameter

Injection pressure

MPa

167

Screw L:D ratio

22.7:1

CLAMPING UNIT

Clamping force

5000

Opening Stroke

720

Space between tie bars

mm x mm

780 x 780

Mold thickness(min)

350

Mold thickness(max)

850

Hydraulic ejection stroke

160

Hydraulic ejection force

182

POWER UNIT

Pump motor

Heating capacity

36.9

GENERAL

Oil tank capacity

655

#	Value
A	2138 mm
B	8500 mm
C	8577 mm
D	2674 mm
E	2128 mm

Value

2138 mm

8500 mm

8577 mm

2674 mm

2128 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

HMD 500M8-SPVA highspeed Injection Molding Machine

Machine Specification

Machine Dimension

Q & A