Injection Molding Machine

Description	Unit	Value
Shot volume	cm³	399
Shot weight	g	375
Shot speed	mm/s	250
Screw diameter	mm	46
Injection pressure	MPa	150
Screw L:D ratio	--	24:1
CLAMPING UNIT
Clamping force	kN	2180
Opening Stroke	mm	490
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	200
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	140
Hydraulic ejection force	kN	50
POWER UNIT
Pump motor	kW	59
Heating capacity	kW	18.6
GENERAL
Oil tank capacity	L	275

Description

Unit

Value

INJECTION UNIT

Shot volume

cm³

399

Shot weight

375

Shot speed

mm/s

250

Screw diameter

Injection pressure

MPa

150

Screw L:D ratio

24:1

CLAMPING UNIT

Clamping force

2180

Opening Stroke

490

Space between tie bars

mm x mm

520 x 520

Mold thickness(min)

200

Mold thickness(max)

550

Hydraulic ejection stroke

140

Hydraulic ejection force

POWER UNIT

Pump motor

Heating capacity

18.6

GENERAL

Oil tank capacity

275

#	Value
A	1825 mm
B	5546 mm
C	5724 mm
D	2293mm
E	1320 mm

Value

1825 mm

5546 mm

5724 mm

2293mm

1320 mm

Q & A

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
High-speed hydraulic motor.
Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

HMD218M8A-SPIII highspeed Injection Molding Machine

Machine Specification

Machine Dimension

Q & A