Injection Molding Machine

JU10800III - 11300A Twoplaten Injection Molding Machine

Machine Specification

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	5227
Shot weight	g	4756
Shot speed	mm/s	924
Screw diameter	mm	110
Injection pressure	MPa	190
Screw L:D ratio	--	26.2
CLAMPING UNIT
Clamping force	kN	10800
Opening Stroke	mm	1900
Space between tie bars	mm x mm	1260 x 1100
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	230
POWER UNIT
Pump motor	kW	130
Heating capacity	kW	104
GENERAL
Oil tank capacity	L	1250

Machine Dimension

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	4180 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1318 mm
H	1212 mm
I	544 mm
J	4699 mm
K	4913 mm
M	4014 mm
N	1840

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

Hot Injection Automation News