Injection Molding Machine

JU10800III - 11300B Twoplaten Injection Molding Machine

Machine Specification

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	6220
Shot weight	g	5661
Shot speed	mm/s	1100
Screw diameter	mm	120
Injection pressure	MPa	159
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	10800
Opening Stroke	mm	1900
Space between tie bars	mm x mm	1260 x 1100
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	230
POWER UNIT
Pump motor	kW	130
Heating capacity	kW	104
GENERAL
Oil tank capacity	L	1250

Machine Dimension

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	4180 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1318 mm
H	1212 mm
I	544 mm
J	4699 mm
K	4913 mm
M	4014 mm
N	1840

Q & A

What Would be a SWITEK Turn-key 8 Cavities silicone Cartridge Tubes Side Entry IML Solutions Include?

With the advancement of the IML technology, more and more silicone cartridge producers choose to have an IML silicone cartridge tubes as the subsitution of the traditional off print silicone cartridge tubes. With an IML solutions, the silicone cartridge tubes producer will be able to produce an IML silicone cartridge tubes immediately after the injection process.

8 Cavities silicone Cartridge Tubes Side Entry IML Solution

Generally for one set of silicone cartridge tubes there are 3 parts, the body of the silicone tube,the caps for the repeat use of the silicone sealant and the bottom block which you can push the sealant out. So for a standard turn-key IML solutions of an 8 cavities silicone cartridge tubes SWITEK will provide:

Side entry IML Robot with 8 cavities magazine + EOAT Sets for IML production of silicone cartridge tubes.
8 Cavities hot runner mold for silliocne cartridge tubes body. The injection molding machine to recommend for this part would be YIZUMI UN350A5-EU high end servo injection molding machine, HAIDA HD330L servo injection molding machine and HaiTian MA3800 servo injection molding machine.
16 Cavities hot runner mold for bottom block. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
32 Cavities hot runner mold for caps. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.

For the injection molding machine the silicone cartridge producer can choose to buy from the local distributors or have SWITEK to buy it as part of the turn-key IML solutions.

For more information about a turn-key IML solution for Silicone cartridge tube please feel free to contact Adams from SWITEK Automation for a professional proposal of a ready to work IML system for IML Silicone cartridge production.

Hot Injection Automation News