sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1423 |
| Shot weight | g | 1295 |
| Shot speed | mm/s | 495 |
| Screw diameter | mm | 75 |
| Injection pressure | MPa | 137 |
| Screw L:D ratio | -- | 18.7 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5500 |
| Opening Stroke | mm | 1300 |
| Space between tie bars | mm x mm | 920 x 830 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 900 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 33 |
| GENERAL | ||
| Oil tank capacity | L | 450 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2110 mm |
| B | 2160 mm |
| C | 2327 mm |
| D | 2250 mm |
| E | 1175 mm |
| F | 1175 |
| G | 1082 mm |
| H | 903 mm |
| I | 675 mm |
| J | 3581 mm |
| K | 3705 mm |
| M | 3056 mm |
| N | 1400 |
Why is BOLE BL530EKH an Ideal Injection Molding Machine for 20L IML Paints Pails Project?
BL530EKH is a hydraulic servo energy saving injection molding machine with a clamping force of 5300kN with BOLE central clamping toggle technology, which will have a higher clamping force efficiency against traditional edge clamping force and can save 2~5% material. But, the most attractive feature of this machine to an IML Paint Buckets projector is its opening stroke: 850mm.
For any IML projectors of 20L IML paint buckets the opening stroke is very important to compose an IML system economically. With an opening stroke of 850mm it means that this BL530EKH is suitable for the IML production of most paint buckets with a height < 350mm. It'll have most of the 20L paint buckets included. Compared to its counter part of which mostly would be injection molding machine > 600T, it would be a big budget saving.
Anyway before any decision made about the which injection molding machine to choose for your IML project, the right process would be to provide the sample or 3D drawing of the paint bucket of which you want to produce so SWITEK engineer will evaluate it and make a professional advisory accordingly. If you still have any question about IML paint buckets production please feel free to contact Adams from SWITEK for a budget smart solutions of IML.
Hot Injection Automation News
E-mail: sales@switek.biz
Turn-key IML Solutions
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
