sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2100 |
| Shot weight | g | 1911 |
| Shot speed | mm/s | 567 |
| Screw diameter | mm | 85 |
| Injection pressure | MPa | 141 |
| Screw L:D ratio | -- | 18.9 |
| CLAMPING UNIT | ||
| Clamping force | kN | 6500 |
| Opening Stroke | mm | 1350 |
| Space between tie bars | mm x mm | 1040 x 910 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 950 |
| Hydraulic ejection stroke | mm | 250 |
| Hydraulic ejection force | kN | 110 |
| POWER UNIT | ||
| Pump motor | kW | 55 |
| Heating capacity | kW | 39 |
| GENERAL | ||
| Oil tank capacity | L | 520 |
Clamping Unit
Platen Dimensions
Robot
Front View
Top View
Side View
| # | Value |
|---|---|
| A | 2165 mm |
| B | 2066 mm |
| C | 2366 mm |
| D | 2200 mm |
| E | 1290 mm |
| F | 1290 |
| G | 1082 mm |
| H | 903 mm |
| I | 675 mm |
| J | 3746 mm |
| K | 3722 mm |
| M | 3191 mm |
| N | 1560 |
Why So Many Cutlery Producers Will Choose a Submarine Gate Cold Runner Mold for Their Cutlery Auto-packing Solutions?
Plastic (PP + CA/PLA) cutlery of different size are widely used around the world with a booming demand of "Takeout" food in a fast-paced life nowadays. And as an easy to produce products more and more plastic factory owners joint this business. But for the new producers of cutlery, how to make your investment rewardable?
To producce a plastic cutlery (Knife, Forks and Spoon) the producer will need an injeciton molding machine, the mold and the automation system. For the automation system it could be a robot only for manually packing or robot + auto-packing system for a cutlery auto-packing system. For the mold the cutlery can either choose a hot runner mold or a cold runner mold. But more and more producer will choose a submarine gate cold runner mold, why?
The most important is the cost advantage of a submarine gate cold runner mold against a hot runner one. As a low value added products most of the cutlery producing system are low budget project, and reduction of the investment means an increase of the profit in the future.
For more ideas about a cutlery auto-packing solution please contact Adams from SWITEK to get a turn-key solution of cutlery packing.
Hot Injection Automation News
E-mail: sales@switek.biz
Turn-key IML Solutions
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
