sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 763 |
| Shot weight | g | 557 |
| Shot speed | mm/s | 450 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 191 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2100 |
| Opening Stroke | mm | 575 |
| Space between tie bars | mm x mm | 580 x 580 |
| Mold thickness(min) | mm | 340 |
| Mold thickness(max) | mm | 690 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 115 |
| Heating capacity | kW | 27.9 |
| GENERAL | ||
| Oil tank capacity | L | 420 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 816 mm |
| C | 921 mm |
| D Max | 1600 mm |
| G | 2286 mm |
| M | 6842 mm |
| F Min | 1041 mm |
| S | 237 mm |
| SH | 2226 mm |
What Would be a Preferable Mould Layout Design for a Petri Dish Packing System?
SWITEK is now providing two kinds of solutions for Petri dish packing, one is a packing system with top entry picking robot and the other is a system with a side entry picking robot. The petri dish producer can decide which solutions is better according to the layout design of the workshop.
Traditionally the mould layout design for the Petri dish production will have the top and base integrated into the same mould which could be 2 + 2, 4 + 4 or 8 + 8 with the cover to the top of the mould. The cover on top design is preferable to an automation system of Petri dish packing.
For an automation system of Petri dish packing, the best is to have a turn-key solutions of Petri dish packing of which SWITEK will have the whole system well tested before delivery to ensure that the automation system which you received is a ready to work one to reduce the cost of sytem start up.
Hot Injection Automation News
E-mail: sales@switek.biz
Turn-key IML Solutions
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
