사출 성형기

설명	단위	값
샷 볼륨	cm³	10776
샷 무게	g	9806
샷 속도	mm/s	81
나사 직경	mm	140
사출압력	MPa	164
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	18000
오프닝 스트로크	mm	2500
타이바 사이의 공간	mm x mm	1650 x 1550
금형 두께(min)	mm	700
금형 두께(max)	mm	1500
유압 배출 스트로크	mm	380
유압 방출력	kN	300
전원 장치
펌프 모터	kW	135
난방능력	kW	79
일반적인
오일탱크 용량	L	2200

설명

단위

값

주입 장치

샷 볼륨

cm³

10776

샷 무게

9806

샷 속도

mm/s

나사 직경

140

사출압력

MPa

164

나사 L:D 비율

클램핑 유닛

클램핑 력

18000

오프닝 스트로크

2500

타이바 사이의 공간

mm x mm

1650 x 1550

금형 두께(min)

700

금형 두께(max)

1500

유압 배출 스트로크

380

유압 방출력

300

전원 장치

펌프 모터

135

난방능력

일반적인

오일탱크 용량

2200

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

BU1800 - B twoplaten 사출 성형기

기계 사양

기계 차원

Q & A