사출 성형기

설명	단위	값
샷 볼륨	cm³	3925
샷 무게	g	3572
샷 속도	mm/s	918
나사 직경	mm	100
사출압력	MPa	191
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	9000
오프닝 스트로크	mm	1600
타이바 사이의 공간	mm x mm	1180 x 1000
금형 두께(min)	mm	500
금형 두께(max)	mm	1100
유압 배출 스트로크	mm	300
유압 방출력	kN	350
전원 장치
펌프 모터	kW	120
난방능력	kW	49
일반적인
오일탱크 용량	L	1800

설명

단위

값

주입 장치

샷 볼륨

cm³

3925

샷 무게

3572

샷 속도

mm/s

918

나사 직경

100

사출압력

MPa

191

나사 L:D 비율

클램핑 유닛

클램핑 력

9000

오프닝 스트로크

1600

타이바 사이의 공간

mm x mm

1180 x 1000

금형 두께(min)

500

금형 두께(max)

1100

유압 배출 스트로크

300

유압 방출력

350

전원 장치

펌프 모터

120

난방능력

일반적인

오일탱크 용량

1800

#	Value
A	3022 mm
B	1517 mm
C	1505 mm
D	1397 mm
E	1387 mm
F	2100 mm
G	1600 mm
H	1498 mm
I	2280 mm
J	1500 mm
K	1730 mm
L	2425 mm
M	2138 mm
N	2200 mm

Value

3022 mm

1517 mm

1505 mm

1397 mm

1387 mm

2100 mm

1600 mm

1498 mm

2280 mm

1500 mm

1730 mm

2425 mm

2138 mm

2200 mm

Q & A

For Thin Wall Container IML Production, Will YIZUME P250E or P250K3 a Better Choice for Your Project?

As for which injection molding machine is a better choice for your IML project, it'll depends on your budget and requirement about the parts. As we know both P250E and P280K3 are excellent high speed injection molding machine designed for the injection production of thin wall containers with high injection speed for the fast injection of thin wall containers. They're no dobt excellent injection molding machine for your IML project. But, how to make a decision between?

Both P250E and P250K3 has similar injection speed (300/500 mm/s optional for P250E and 320mm/s for P250K3) but P250E is an all electric injection molding machine while P250K3 is a high speed hydraulic injection molding machine. Of course an all electric injection molding machine is a better choice for food container IML production, but, the cost of it would be much higher than P250K3. So, if your budget is sufficient, P250E, if not, P250K3 would be the right one for you.

The IML robot for YIZUMI P250K3/P250E would be SWITEK IML Robot SW833. In K2019 SWITEK IML robot SW833 work with P250E in demo of 4 cavities cups at the cycle time of 2.1s, this combination is one of the best IML solution for small size containers IML production.

FA900 twoplaten 사출 성형기

기계 사양

기계 차원

Q & A