사출 성형기

설명	단위	값
샷 볼륨	cm³	442
샷 무게	g	402
샷 속도	mm/s	350
나사 직경	mm	50
사출압력	MPa	180
나사 L:D 비율	--	22.5
클램핑 유닛
클램핑 력	kN	3000
오프닝 스트로크	mm	550
타이바 사이의 공간	mm x mm	590 x 590
금형 두께(min)	mm	220
금형 두께(max)	mm	600
유압 배출 스트로크	mm	150
유압 방출력	kN	70
전원 장치
펌프 모터	kW	147
난방능력	kW	21
일반적인
오일탱크 용량	L	0

설명

단위

값

주입 장치

샷 볼륨

cm³

442

샷 무게

402

샷 속도

mm/s

350

나사 직경

사출압력

MPa

180

나사 L:D 비율

22.5

클램핑 유닛

클램핑 력

3000

오프닝 스트로크

550

타이바 사이의 공간

mm x mm

590 x 590

금형 두께(min)

220

금형 두께(max)

600

유압 배출 스트로크

150

유압 방출력

전원 장치

펌프 모터

147

난방능력

일반적인

오일탱크 용량

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

HD300KDY hybrid 사출 성형기

기계 사양

기계 차원

Q & A