사출 성형기

JU10800III - 8930B Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	4847
샷 무게	g	4410
샷 속도	mm/s	922
나사 직경	mm	110
사출압력	MPa	162
나사 L:D 비율	--	22
클램핑 유닛
클램핑 력	kN	10800
오프닝 스트로크	mm	1900
타이바 사이의 공간	mm x mm	1260 x 1100
금형 두께(min)	mm	500
금형 두께(max)	mm	1200
유압 배출 스트로크	mm	350
유압 방출력	kN	230
전원 장치
펌프 모터	kW	112
난방능력	kW	83
일반적인
오일탱크 용량	L	960

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	2850 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1228 mm
H	1102 mm
I	544 mm
J	4699 mm
K	4689 mm
M	4014 mm
N	1840

Q & A

For vision control system for IML containers, what's the advantages and disadvantages of the open type of vision control system?

Vision control is now a very important in IML system especially the IML solutions for dairy products packages like yogurt cups, butter cups etc. For most European IML solutions providers like BRINK that they'll choose an open type of Vision control system which will check if the containers are well labeled or not immediately after the containers picked out from the mold and have them re-stacked after the vision control. This kind of solution will help to increase the efficiency of the IML System and pick out the defect parts quickly.

But, for some minor defect like dirt it would be impossible to be checked out because the precision of the cameras would be influenced by the changing light of the environment. To solve this problem the updated solution would be to have the IML containers checked in a closed light box which will creat a stable environment to the camera to minimize the misjudgement of the good and non good parts. -- SWITEK Yogurt Cups Vision Control Solution

뜨거운 주입 자동화 뉴스