사출 성형기

JU5500III - 4630B Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	2497
샷 무게	g	2272
샷 속도	mm/s	593
나사 직경	mm	85
사출압력	MPa	160
나사 L:D 비율	--	20.7
클램핑 유닛
클램핑 력	kN	5500
오프닝 스트로크	mm	1300
타이바 사이의 공간	mm x mm	920 x 830
금형 두께(min)	mm	350
금형 두께(max)	mm	900
유압 배출 스트로크	mm	250
유압 방출력	kN	110
전원 장치
펌프 모터	kW	65
난방능력	kW	48
일반적인
오일탱크 용량	L	600

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2110 mm
B	2016 mm
C	2671 mm
D	2250 mm
E	1175 mm
F	1175
G	1177 mm
H	943 mm
I	675 mm
J	3581 mm
K	4019 mm
M	3056 mm
N	1400

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

뜨거운 주입 자동화 뉴스