사출 성형기

JU6500III - 5330C Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	3534
샷 무게	g	3216
샷 속도	mm/s	856
나사 직경	mm	100
사출압력	MPa	131
나사 L:D 비율	--	19.8
클램핑 유닛
클램핑 력	kN	6500
오프닝 스트로크	mm	1350
타이바 사이의 공간	mm x mm	1040 x 910
금형 두께(min)	mm	400
금형 두께(max)	mm	950
유압 배출 스트로크	mm	250
유압 방출력	kN	110
전원 장치
펌프 모터	kW	75
난방능력	kW	54
일반적인
오일탱크 용량	L	600

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2686 mm
D	2200 mm
E	1290 mm
F	1290
G	1207 mm
H	1028 mm
I	675 mm
J	3746 mm
K	4586 mm
M	3191 mm
N	1560

Q & A

What is a Picking Robot?

A picking robot in an injection project is a robotic arm which will pick the parts from the mould and have it placed on the conveyor or other automation system to have another processing. The projector will choose a picking robot according to the size of the injection molding machine, the injection cycle time, the weight of the parts etc to choose a picking robot.

High Speed Picking Robot SW7112DS

Take the SWITEK hgih speed 3 axis servo robot SW7112DS as an example, with a pay load of 2kg and a dry cycle time of 3.3s only designed for injection molding machine ranging from 150Ton ~ 500Tone, it could be regarded as one of the best picking robot for the thin-wall containers production business with a picking capacity up to 8 cavities of 700ml cups, but if for the picking of a bumper it would not be suitable. Anyway, to choose a picking robot for your injection project, the key point would be: