사출 성형기

JU7500III - 5330D Twoplaten 사출 성형기

기계 사양

설명	단위	값
주입 장치
샷 볼륨	cm³	4276
샷 무게	g	3892
샷 속도	mm/s	1036
나사 직경	mm	110
사출압력	MPa	108
나사 L:D 비율	--	18
클램핑 유닛
클램핑 력	kN	7500
오프닝 스트로크	mm	1400
타이바 사이의 공간	mm x mm	1110 x 960
금형 두께(min)	mm	450
금형 두께(max)	mm	950
유압 배출 스트로크	mm	300
유압 방출력	kN	195
전원 장치
펌프 모터	kW	75
난방능력	kW	54
일반적인
오일탱크 용량	L	730

기계 차원

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2685 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1203 mm
H	1027 mm
I	544 mm
J	4055 mm
K	4478 mm
M	3450 mm
N	1607

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

뜨거운 주입 자동화 뉴스