sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Descrição | Unidade | Valor |
|---|---|---|
| UNIDADE DE INJEÇÃO | ||
| Volume de tiro | cm3 | 570 |
| Peso do tiro | g | 519 |
| Velocidade de tiro | mm/s | 164 |
| Diâmetro do parafuso | mm | 55 |
| Pressão de injeção | MPa | 182 |
| Proporção L:D do parafuso | -- | 21 |
| UNIDADE DE APERTO | ||
| Força de aperto | kN | 3000 |
| Curso de abertura | mm | 610 |
| Espaço entre barras de ligação | mm x mm | 730 x 730 |
| Espessura do molde(min) | mm | 250 |
| Espessura do molde(max) | mm | 680 |
| Curso de ejeção hidráulica | mm | 160 |
| Força de ejeção hidráulica | kN | 69 |
| UNIDADE DE ENERGIA | ||
| Motor da bomba | kW | 71 |
| Capacidade de aquecimento | kW | 0 |
| EM GERAL | ||
| Capacidade do tanque de óleo | L | 0 |
Machine Dimension
Platen Dimension
Why So Many Cutlery Producers Will Choose a Submarine Gate Cold Runner Mold for Their Cutlery Auto-packing Solutions?
Plastic (PP + CA/PLA) cutlery of different size are widely used around the world with a booming demand of "Takeout" food in a fast-paced life nowadays. And as an easy to produce products more and more plastic factory owners joint this business. But for the new producers of cutlery, how to make your investment rewardable?
To producce a plastic cutlery (Knife, Forks and Spoon) the producer will need an injeciton molding machine, the mold and the automation system. For the automation system it could be a robot only for manually packing or robot + auto-packing system for a cutlery auto-packing system. For the mold the cutlery can either choose a hot runner mold or a cold runner mold. But more and more producer will choose a submarine gate cold runner mold, why?
The most important is the cost advantage of a submarine gate cold runner mold against a hot runner one. As a low value added products most of the cutlery producing system are low budget project, and reduction of the investment means an increase of the profit in the future.
For more ideas about a cutlery auto-packing solution please contact Adams from SWITEK to get a turn-key solution of cutlery packing.
Notícias sobre automação de injeção a quente
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
