Máquina de moldagem por injeção

JU4500III-4630C twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	2799
Peso do tiro	g	2547
Velocidade de tiro	mm/s	665
Diâmetro do parafuso	mm	90
Pressão de injeção	MPa	143
Proporção L:D do parafuso	--	19.6
UNIDADE DE APERTO
Força de aperto	kN	4500
Curso de abertura	mm	1050
Espaço entre barras de ligação	mm x mm	810 x 800
Espessura do molde(min)	mm	350
Espessura do molde(max)	mm	850
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	45
Capacidade de aquecimento	kW	33
EM GERAL
Capacidade do tanque de óleo	L	450

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2070 mm
B	1986 mm
C	2317 mm
D	2300 mm
E	1084 mm
F	1084
G	1082 mm
H	903 mm
I	675 mm
J	3269 mm
K	3597 mm
M	2774 mm
N	1248

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

Notícias sobre automação de injeção a quente