Máquina de moldagem por injeção

JU6500III - 2230C Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	1423
Peso do tiro	g	1295
Velocidade de tiro	mm/s	585
Diâmetro do parafuso	mm	75
Pressão de injeção	MPa	137
Proporção L:D do parafuso	--	18.7
UNIDADE DE APERTO
Força de aperto	kN	6500
Curso de abertura	mm	1350
Espaço entre barras de ligação	mm x mm	1040 x 910
Espessura do molde(min)	mm	400
Espessura do molde(max)	mm	950
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	55
Capacidade de aquecimento	kW	33
EM GERAL
Capacidade do tanque de óleo	L	450

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2327 mm
D	2200 mm
E	1290 mm
F	1290
G	1082 mm
H	903 mm
I	675 mm
J	3746 mm
K	3707 mm
M	3191 mm
N	1560

Q & A

How is the SWITEK IML System for 2 Cavities Butter Box with 2 Lables Designed?

IML Containers with 2 lables will provide more space for the dairy products producers to design their pattern and provide more detailed description of their products, but with one more label it'll make the design of the IML system much more complex. How would be the two labels to be put into the mold and what would be the recommendation of such an IML system?

2 Cavities IML Solutions for Containers with 2 Labels

SWITEK has both solutions of 2 cavities IML solutions for oval shpe box and 4 cavities IML solutions for round cups with 2 labels. The difference of the 2 labels IML solutions of wrap + bottom labeling will request more space for the magazine layout design. Both the labels would be put into the cavities at the movable part of the platen with the parts to be picked from the fixed part of the platen.

Since the structure of the magazine for the IML containers with two labels is much more complex than that of wrap labeling only, the best solution is to have a turn-key IML solutions from SWITEK Automation so we can have the robot and the injection mould well tested together before delivery to ensure that the system which you received is ready to work. For more details about a turn-key IML solutions please contact Adams from SWITEK Automation, you're personal advisor of IML Soutions integration.

Notícias sobre automação de injeção a quente