Máquina de moldagem por injeção

JU6500III - 5330B Twoplaten Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	2863
Peso do tiro	g	2605
Velocidade de tiro	mm/s	693
Diâmetro do parafuso	mm	90
Pressão de injeção	MPa	161
Proporção L:D do parafuso	--	22
UNIDADE DE APERTO
Força de aperto	kN	6500
Curso de abertura	mm	1350
Espaço entre barras de ligação	mm x mm	1040 x 910
Espessura do molde(min)	mm	400
Espessura do molde(max)	mm	950
Curso de ejeção hidráulica	mm	250
Força de ejeção hidráulica	kN	110
UNIDADE DE ENERGIA
Motor da bomba	kW	75
Capacidade de aquecimento	kW	54
EM GERAL
Capacidade do tanque de óleo	L	600

Dimensão da Máquina

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2686 mm
D	2200 mm
E	1290 mm
F	1290
G	1207 mm
H	1028 mm
I	675 mm
J	3746 mm
K	4586 mm
M	3191 mm
N	1560

Q & A

What's the Working Process of SWITEK Ball Valve Injection Automation System?

PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.

4 Cavities Ball Valve Injection Automation Solutions

Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:

The O Ring sorting and inserting
The ball valve core sorting and inserting
The ball valve picking
The runner cutting
The turning of the ball valve core

The functions above will ensure that the system will produce the PVC/PPR ball valve automatically.

For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.

Notícias sobre automação de injeção a quente