Máquina de moldagem por injeção

MA5300/4000G - D servo Máquina de moldagem por injeção

Especificação da máquina

Descrição	Unidade	Valor
UNIDADE DE INJEÇÃO
Volume de tiro	cm³	3456
Peso do tiro	g	3145
Velocidade de tiro	mm/s	766
Diâmetro do parafuso	mm	100
Pressão de injeção	MPa	115
Proporção L:D do parafuso	--	17.6
UNIDADE DE APERTO
Força de aperto	kN	5300
Curso de abertura	mm	825
Espaço entre barras de ligação	mm x mm	830 x 800
Espessura do molde(min)	mm	350
Espessura do molde(max)	mm	850
Curso de ejeção hidráulica	mm	200
Força de ejeção hidráulica	kN	158
UNIDADE DE ENERGIA
Motor da bomba	kW	55
Capacidade de aquecimento	kW	45.65
EM GERAL
Capacidade do tanque de óleo	L	990

Dimensão da Máquina

Platen Dimensions

Machine Dimmension

Q & A

What Would be a SWITEK Turn-key 8 Cavities silicone Cartridge Tubes Side Entry IML Solutions Include?

With the advancement of the IML technology, more and more silicone cartridge producers choose to have an IML silicone cartridge tubes as the subsitution of the traditional off print silicone cartridge tubes. With an IML solutions, the silicone cartridge tubes producer will be able to produce an IML silicone cartridge tubes immediately after the injection process.

8 Cavities silicone Cartridge Tubes Side Entry IML Solution

Generally for one set of silicone cartridge tubes there are 3 parts, the body of the silicone tube,the caps for the repeat use of the silicone sealant and the bottom block which you can push the sealant out. So for a standard turn-key IML solutions of an 8 cavities silicone cartridge tubes SWITEK will provide:

Side entry IML Robot with 8 cavities magazine + EOAT Sets for IML production of silicone cartridge tubes.
8 Cavities hot runner mold for silliocne cartridge tubes body. The injection molding machine to recommend for this part would be YIZUMI UN350A5-EU high end servo injection molding machine, HAIDA HD330L servo injection molding machine and HaiTian MA3800 servo injection molding machine.
16 Cavities hot runner mold for bottom block. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
32 Cavities hot runner mold for caps. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.

For the injection molding machine the silicone cartridge producer can choose to buy from the local distributors or have SWITEK to buy it as part of the turn-key IML solutions.

For more information about a turn-key IML solution for Silicone cartridge tube please feel free to contact Adams from SWITEK Automation for a professional proposal of a ready to work IML system for IML Silicone cartridge production.

Notícias sobre automação de injeção a quente