sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Descrição | Unidade | Valor |
|---|---|---|
| UNIDADE DE INJEÇÃO | ||
| Volume de tiro | cm3 | 1583 |
| Peso do tiro | g | 1441 |
| Velocidade de tiro | mm/s | 320 |
| Diâmetro do parafuso | mm | 80 |
| Pressão de injeção | MPa | 144 |
| Proporção L:D do parafuso | -- | 20 |
| UNIDADE DE APERTO | ||
| Força de aperto | kN | 5000 |
| Curso de abertura | mm | 850 |
| Espaço entre barras de ligação | mm x mm | 920 x 920 |
| Espessura do molde(min) | mm | 400 |
| Espessura do molde(max) | mm | 920 |
| Curso de ejeção hidráulica | mm | 260 |
| Força de ejeção hidráulica | kN | 96 |
| UNIDADE DE ENERGIA | ||
| Motor da bomba | kW | 132 |
| Capacidade de aquecimento | kW | 31 |
| EM GERAL | ||
| Capacidade do tanque de óleo | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 287 mm |
| B | 0 mm |
| C | 0 mm |
| D Max | 2193 mm |
| E | 3957 mm |
| L | 8385 mm |
| M Min | 8150 mm |
Why is BOLE BL530EKH an Ideal Injection Molding Machine for 20L IML Paints Pails Project?
BL530EKH is a hydraulic servo energy saving injection molding machine with a clamping force of 5300kN with BOLE central clamping toggle technology, which will have a higher clamping force efficiency against traditional edge clamping force and can save 2~5% material. But, the most attractive feature of this machine to an IML Paint Buckets projector is its opening stroke: 850mm.
For any IML projectors of 20L IML paint buckets the opening stroke is very important to compose an IML system economically. With an opening stroke of 850mm it means that this BL530EKH is suitable for the IML production of most paint buckets with a height < 350mm. It'll have most of the 20L paint buckets included. Compared to its counter part of which mostly would be injection molding machine > 600T, it would be a big budget saving.
Anyway before any decision made about the which injection molding machine to choose for your IML project, the right process would be to provide the sample or 3D drawing of the paint bucket of which you want to produce so SWITEK engineer will evaluate it and make a professional advisory accordingly. If you still have any question about IML paint buckets production please feel free to contact Adams from SWITEK for a budget smart solutions of IML.
Notícias sobre automação de injeção a quente
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
