sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Descrição | Unidade | Valor |
|---|---|---|
| UNIDADE DE INJEÇÃO | ||
| Volume de tiro | cm3 | 1965 |
| Peso do tiro | g | 1788 |
| Velocidade de tiro | mm/s | 152 |
| Diâmetro do parafuso | mm | 80 |
| Pressão de injeção | MPa | 168 |
| Proporção L:D do parafuso | -- | 23.4 |
| UNIDADE DE APERTO | ||
| Força de aperto | kN | 5080 |
| Curso de abertura | mm | 775 |
| Espaço entre barras de ligação | mm x mm | 805 x 715 |
| Espessura do molde(min) | mm | 290 |
| Espessura do molde(max) | mm | 800 |
| Curso de ejeção hidráulica | mm | 225 |
| Força de ejeção hidráulica | kN | 152 |
| UNIDADE DE ENERGIA | ||
| Motor da bomba | kW | 45 |
| Capacidade de aquecimento | kW | 38.3 |
| EM GERAL | ||
| Capacidade do tanque de óleo | L | 900 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7800 mm |
| B | 4135 mm |
| C | 75 mm |
| D | 520 mm |
| E | 60 mm |
| F | 220 mm |
| G | 720 mm |
| H | 1000 mm |
| I | 1000 mm |
| J | 1245 mm |
| K | 300 mm |
| L | 1530 mm |
| M | 1730 mm |
| N | 220 mm |
| O | 60 mm |
| P | 880 mm |
For A 20L IML Bucket Project, Which of the JUPITER Series Injection Molding Machine is the Best Choice?
For A 20L IML Bucket Project, Which of the JUPITER Series Injection Molding Machine is the Best Choice?
20L IML bucket is now a very popular solution as the package of the branded paints with it's easy production and dynamic image design. To choose an injection molding machine among the JUPITER series machinery, the most important parameter to consider is the opening stroke of the injection molding machine of which to ensure that the robotic arm will have sufficient moving space in mold to put in the label and pick the parts.
To start a project of 20L IML paint pail, first of all we must have the 3D dimensional measurement of the bucket especially the height of it. For most of the 20L IML pail the height would be around 350mm, to ensure that the IML robot will have sufficient space in the mold to put the lalbel and pick the IML buckets out, the minimum opening stroke of the injection molding machine would be around 850mm, so the best of JUPITER two platen injection molding for your 20L paint pails would be JU7500 which the mold opening stroke is 1400/900mm.
For more information of an IML projection planning please feel free to contact Adams from SWITEK to get a ready to work turn-key solutions of IML container production.
Notícias sobre automação de injeção a quente
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
