Abstract

The P200 is a high speed hydraulic injection molding machine designed and produced by YIZUMI, the 2^nd largest injection molding machine maufacturer from China for the fast production of the small size thin-wall containers. With an opening stroke of 500mm, it's suitable for the IML production of thin-wall containers with a height ≤ 115mm. In K-Show 2019, YIZUMI onshowed P200 with a turn-key solutions of 4 cavities butter cups production at a cycle time of 2.1s.

What Are the Features of YIZUMI P200 for Thin-wall Containers High Speed IML Production?

• High-rigid Machine Frame

  The steel I-Beam type machine frame provides sufficient rigidity to ensure a smooth and vibration-free operation at high speed.

• High-rigid and low Deformation Platens

  The adoption of reinforced platen design according to the characteristics of thin-walled packaging products. With perfect combination of strength and rigidity, while minimize the platen deformation, it maintains a flexible and smooth movement.

• Optimized Cylinder Sealing Structure

  Based on many years of manufacturing experience and the characteristics of oil circuit in high-speed single cylinder devices, the cylinder sealing structure is further optimized to ensure the durability of the injection unit and avoid oil leakage.

• Ejector-on-Fly

  Ejector while mold opening to shorten the production cycle time.

• High-speed Mold Opening/Closing Proportional Valve

  Further reduce the reaction time. Durable the repetitive accuracy of mold opening ends and increase the operating speed of mold opening/closing by 15%-20%, suitable for the production of various precision thin-walled products.

• Linear Guide Rails

  Reduce the friction from movable platen to further lower energy consumption, improve operating speed and shorten the production cycle time.

• Servo Injection with Accumulator

  Increase the injection speed up to 800mm/s and double the repetitive accuracy of injection. It is capable to produce thinner and more sophisticated products while shortening the injection time and improving the production efficiency.

Turn-key IML Solutions which is Possible to be with YIZUMI P200

Turn-key 4 Cavities Yogurt Cups Lids Side Entry IML Solutions

Turn-key 4 Cavities Butter Box Side Entry IML Solutions

Small Size Yogurt Cups Side Entry IML Solutions

Why is SW833-S6 is the Best IML Robot for YIZUMI P200

The SW833-S6 is the new generation of high speed IML robot designed for the fast production of small and medium size thin-wall containers

• Custom made size to best match the size of YIZUMI P200
• Advanced control system, with minimal in mold time of only 0.8s
• Easy installation of the magazine and EOAT sets for a fast switch between different products
• Easy programming to reduce your staff training cost
• Easy integration with other function units for intelligent production