High Precision Servo Injection Molding Machine for Silicone Cartridge IML Production -- Sonly U300TS
Author:adams8846 Oct. 27, 2026, 9:19 a.m.
Abstract
The silicone cartridge is a thick-wall container for the clean use of the silicone in projects and safe storage and delivery. Different from the offprint
technology, the IML technology is getting more and more popular among the producers of the silicone cartridge with it's premium looking and high production
efficiency. Here in this article we're discussing the advantages of have Sonly U300TS, the high precision servo driven injection molding machine produced by
ZheJiang Sonly Intelligent Equipment Co., Ltd., for your silicone cartridge IML production project.
The Features of SONLY U300TS Servo-driven Energy Saving Injection Molding Machine for Silicone Cartridge IML Production
With a screw diameter ratio up to 24, the SONLY U300TS has a faster plasticization speed, short drying cycle, and ultra-high plasticizer capacity
provide guarantee for the high efficiency of the whole machine.
The new full-body structure developed by the Sonly, stable and reliable servo system and parts quality, is provided for the performance stability
and repeatability of the whole machine guaranteed.
The high quality energy saving servo system is adopted, and the energy consumption is lower. Multiple optimization of the whole oil circuit, including
reducing the movement resistance and energy loss, ensure the energy consumption of the whole machine is low. Stable function, convenient operation and
automatic monitoring.
Clamping Device
New conjoined hyperbolic elbow five fulcrum clamping mechanism, after a detailed calculation, manual and software running curve is more stable,
smooth process is faster, and longer service life.
New conjoined template through finite element analysis software, reonable structure, convenient maintenance, good rigidity, high strength, smll deformation.
Electronic scale attached to cross, speed control is more agile, is conductive to protect the mould.
Lubrication automatic detection alarm function, can effectively guarantee the lubrication of all nodes in place.
Compared with the same, we have a bigger bar spacing, molar volume and open mold, processing more plastic products, the high cost performance of the machine.
Arched plate can protect mold effectively. Especially, in the mold is much small than plate situation.
Finish Machining
Mor than 90% parts completely independent processing, effectively guarantee the procesing precision.
Large-scale machining center, gantry milling and other equipment to produce components for machines ≤ 3400Tons
ISO9001 quality management system certification, quality for the enterprise to built on a new level.
Strict inspection division of labor, make the production each link control.
The Injection Device
The bridge beam injection ensure smooth, high repeat precision
Injection and holding pressure closed-loop control, precision back pressure control
The structure of the screw on the cylinder demountable type, easy to change
High quality seals, effectively guarantee the pressure and speed
The Electronic Control Unit
High precision servo-control system, save up to 70% energy
User friendly operatiing interface
Comply with international safety standards of electrical ccircuit design
Multicolor alarming device, clear display machine status
The Hydraulic Equipment
With world renowned hydraulic components to ensure the reliability of the system.
Up to date hydraulic system design, energy saving and faster reaction
Oil temperature alarming device, effectively control the oil temperature, hydraulic components and mechanical seals.
Visual oil window, make the oil more reliable and simple maintenance
Internal adopts pensu processing tank
All frame specially analysis software, the machine better rigidity, bearing more reasonable.
Turn-key Silicone Cartridge IML Production Solutions
Tips of Preparing for a Silicone Cartridge IML Production Project
High Speed Injection Molding Machine or Servo Injection Molding Machine: The silicone cartridge is a thick-wall deep cavity container,
the total injection cycle would be around 25seconds, that's why we recommend HaiTian MA3600/2250G,the high precision servo injection molding machine
here for your silicone cartridge IML production project.
Top Entry IML Solution or Side Entry IML Solution: A top entry IML solution is a price smart solution for a 4 cavities silicone cartridge
tubes IML production; While the side entry IML solution is a more stable solution for silicone cartridge projects of more than 8 cavities.
A Turn-key Solution or have Seperate Purchasing of the Molds: A set of the silicone cartridge include 3 molds: the cap, the body and the
bottom. The advantage of a turn-key solution is that the IML system integrator will have the molds tested with the IML system before delivery
to reduce the system starting up cost.
SWITEK or Other IML Solutions Providers: As the leading IML solutions provider from China, SWITEK is delivering more than 45sets of
IML system for silicone cartridge IML production annually and will provide LTS technical support. The cooperating with SWITEK in your IML
silicone cartridge project will be a trouble free cooperating.