Robotic Arms for BORCHE BU Series Two Platen Injection Molding Machine — SW7 Series Axis Servo Robot

Author:adams8846 Oct. 29, 2026, 8:25 a.m.

SWITEK HEAVY DUTY ROBOTIC ARMS

Abstract

The BORCHE BU-V series of two-platen injection molding machins is an injection molding machine designed for the ultra-large size plastic parts with a clamping force starting from 5000kN up to 68,000kN. Which is suitable for the production of plastic parts for Municipal Engineering & Environmental Protection Industrial, New Ruaral Construction Products, the Logistics Containers or Pallets, the Auto Parts and Household Appliances etc. With a payload up to 75kg, SWITEK SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the BORCHE BU-V sreies of two-platen injection molding machine in the projects named above.

The Features of BORCHE BU-V Series Two-platen Injection Molding Machine

  • Super Long Lasting Tie Bar

    During high pressure locking, four tie bars are under equal force, no unbalanced load occured, avoiding tie bar broken theoretically.

  • Moving Platent Clamping

    Tie bars move across clamping cylinder, no contact with seals, less leakage risk; Module type clamping cylinder, can be assembled and disassembled together, easy for maintenance Pistons of four cylinders are controlled separately, which can adjust the locking Position precisely, and assure fast and assure fast and precise locking; Clamping cylinder assembled in the moving platen can balance the load of mold, avoiding forward tilt, improve stability of mold opening and clamping movement.

  • Tie Bar Guiding

    BORCHE BU machine adopts the structure of fixing two bottom tie bars, assures platen moving guiding.
    Machine frame works as the support during platen moving, bottom tie bars work as guiding and auxiliary support.
    Above new guiding structure can guarantee mold movement stability and reliability, avoiding unbalanced force on tie bars and mold jiggling motion, and can load heavier mold.

  • Innovated Injection Structure

    Both carriage cylinder and injection adopt linear guides, which guarantee stable and fast movement, injection supporting made by one piece casting, is rigid and compact. Double carriage cylinder assures injection unit better centering, and stable movement.

  • Intelligent Interconnection

    The human-computer interface from IMM enables the Intelligent Interconnection of IMM, peripherals (cooling machine, mold temperature controller etc. ) and robot. All equipments under close loop control and all data is corresponding with each other, thus product quality is improved, and production cost is reduced.

  • Shorter Cycle Time

    High performance and response controller; 12" touch screen; Intel 1.1G CUP; Better application scalability meets complicated production requirements. With special hydraulic circuit, optimized movement calculation, dry cycle time of the machine is less.

Why is SWITEK SW7 Series Servo Robot One of the Best Robot for BORCHE BU-V Series of Injection Molding Machine?

The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine form 500T~4000T, the features of the SW7 series servo robot include:

  • Kick-back design, providing 30% more EOAT moving space, which is the best solution for deep cavities or large size containers picking.
  • With payload up to 75kg, promise a stable picking of the large size or deep cavity containers.
  • Easy installation with a A/C servo posture for parts picking from a complex structure designed mold.
  • Rich I/O reservation for easy integrating in an automation system.
  • With stardard spareparts supplied by globally renowned brand, reduce your maintenance cost.

Parameters of SWITEK SW7 Series Servo Robot

Robotic Arm
No. Name SW7518DS SW7522DS SW7725DS SW7730DS
1 X1 1785mm 1785mm 2250mm 2250mm
2 X2 1320mm 1680mm 1720mm 1720mm
3 Y 1800mm 2200mm 2500mm 3000mm
4 Z 3120mm 3120mm 4000mm 4000mm
5 YM1 500mm 650mm 680mm 780mm
6 YM2 1300mm 1550mm 1520mm 2220mm
7 W 2480mm 2850mm 3005mm 3005mm
8 L 4160mm 4160mm 5050mm 5050mm
9 H 2650mm 2830mm 3200mm 3440mm
10 Hs 700mm 700mm 900mm 950mm
11 Payload 15kg 15kg 50kg 75kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right