Robotic Arms for LKIMM FORZA Series Two Platen Injection Molding Machine — SW7 Series Axis Servo Robot

Author:adams8846 Oct. 30, 2026, 2:55 a.m.

SWITEK HEAVY DUTY ROBOTIC ARMS

Abstract

The LKIMM FORZA series of two-platen injection molding machins is an injection molding machine designed for the ultra-large size plastic parts with a clamping force starting from 4500kN up to 70,000kN, which is widely applicable to large plastic products, automotive part, and high-gloss plastic products. With a payload up to 75kg, SWITEK SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the KMIMM FORZA sreies of two-platen injection molding machine in the projects named above.

The Features of LKIMM FORZA Series Two-platen Injection Molding Machine

  • CLAMPING UNIT
    • All Models Are Equipped with T-Slots and Mold-Mounting Holes

      Facilitates mold installation and removal, shortens product changeover time, and improves efficiency by 30%-40%.

    • High-Rigidity Platen Sliding Foot + Precision Linear Guide Rails

      Enhances the stability of supporting heavy molds while ensuring precise platen motion.

    • High-Rigidity Platen

      The platens are designed using finite element analysis, ensuring uniform force distribution and minimal deformation.

    • Synchronous Buffer Mechanism for Tie Bar Locking

      Ensures synchronous tie bar locking, providing quick, smooth operation with low noise.

    • High-Precision Clamping Position Monitoring

      Equipped with high-precision position transducer for mold opening and closing, with accuracy up to 0.01mm, allowing real-time monitoring of mold positions on the computer.

    • Four Short-Stroke High-Pressure Cylinders

      Mounted on the fixed platen, ensuring uniform force distribution on the mold under high-pressure conditions, with clamping force monitored in real time on the computer.

    • Independent Diagnal-Positioned Closing Cylinder

      Delivers strong mold opening force and rapid mold movement. All models are equipped with high-pressure mold opening functions to solve problems such as high internal mold stress and difficult mold opening for lighting parts, deep-cavity parts, and similar products.

    • Large-Area Safety Pedal

      Models FA1000T and above are equipped with safety pedals, providing protective safety for the mold opening and closing area while preventing oil contamination on the floor.

  • INJECTION UNIT
    • Rich Configuration Options

      Both single-cylinder and double-cylinder injection systems feature mature and stable structures to meet different requirements. The double-cylinder injection system offers a more compact structure, greatly reducing machine dimensions and saving floor space.

    • High Injection Accuracy

      Injection monitoring utilizes high-precision position transducer, with injection endpoint repeatability ≤±0.2mm and product repeatability ≤0.3%.

    • Barrel Insulation Device

      Equipped with a double-layer detactable barrel cover design, reducing heat loss from heating bands and effectively improving heating and insulation performance.

    • PID Temperature Control Technology

      The barrel adopts ceramic heating bands with high heating efficiency, combined with solid-state relay adaptive temperature control technology, ensuring precise temperature regulation.

  • HYDRAULIC UNIT
    • Fast Response, Strong Overload Capacity, More Energy-Efficient

      The hydraulic system is designed to provide stable and fast response for injection molding machines, with optimized oil circuit working conditions. The system responds quickly, has strong overload capacity, and minimizes energy loss during operation, meeting national Level 1 energe efficiency standards.

    • Precision Filtration And Cooling System

      An independent hydraulic oil circuit system with reserved cooling water interface space, provides filtration accuracy up to 5μ. This ensures precise oil filtration while enhancing cooling performance, extending the service life of machine sealing components, and improving overall stability.

Why is SWITEK SW7 Series Servo Robot One of the Best Robot for LKIMM FORZA Series of Injection Molding Machine?

The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine form 500T~4000T, the features of the SW7 series servo robot include:

  • Kick-back design, providing 30% more EOAT moving space, which is the best solution for deep cavities or large size containers picking.
  • With payload up to 75kg, promise a stable picking of the large size or deep cavity containers.
  • Easy installation with a A/C servo posture for parts picking from a complex structure designed mold.
  • Rich I/O reservation for easy integrating in an automation system.
  • With stardard spareparts supplied by globally renowned brand, reduce your maintenance cost.

Parameters of SWITEK SW7 Series Servo Robot

Robotic Arm
No. Name SW7518DS SW7522DS SW7725DS SW7730DS
1 X1 1785mm 1785mm 2250mm 2250mm
2 X2 1320mm 1680mm 1720mm 1720mm
3 Y 1800mm 2200mm 2500mm 3000mm
4 Z 3120mm 3120mm 4000mm 4000mm
5 YM1 500mm 650mm 680mm 780mm
6 YM2 1300mm 1550mm 1520mm 2220mm
7 W 2480mm 2850mm 3005mm 3005mm
8 L 4160mm 4160mm 5050mm 5050mm
9 H 2650mm 2830mm 3200mm 3440mm
10 Hs 700mm 700mm 900mm 950mm
11 Payload 15kg 15kg 50kg 75kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right