The PowerJet DP series of two-platen injection molding machins is an injection molding machine designed for the ultra-large size plastic parts with
a clamping force starting from 4800kN up to 35,000kN, which is widely applicable to large plastic products, automotive part, and high-gloss plastic
products. With a payload up to 75kg, the SWITEK SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the PowerJet DP sreies of
two-platen injection molding machine in the projects named above.
The Features of PowerJet DP Series Two-platen Injection Molding Machine
More space saving: small footprint, bigger mold carrying capacity
More power saving: servo system configuration, more energy-saving ability
Higher precision: The product less flash
Quiet: smaller hydraulic impact, lower noise and oil consumption
Automatic: accurate mold positioning meets the needs of automatic pickup and insert
Longer life: Even mold force insures long service life
Long and high rigidity slider, with better orientation and parallelism, can carry heavier molds
Stepless adjustment function ensures the accurate and stable clamping force
High rigidity clamping frame makes the whole machine running more smoothly
High-precision linear guide results in faster injection response, and accurate positioning
A variety of efficient special screw and barrel adapts to different types of products
Higher standard configuration, with 12" color display, CPU memory up to 1.4G
Why is SWITEK SW7 Series Servo Robot One of the Best Robot for PowerJet DP Series of Injection Molding Machine?
The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine
form 500T~4000T, the features of the SW7 series servo robot include:
Kick-back design, providing 30% more EOAT moving space, which is the best solution for deep cavities or large size containers picking.
With payload up to 75kg, promise a stable picking of the large size or deep cavity containers.
Easy installation with a A/C servo posture for parts picking from a complex structure designed mold.
Rich I/O reservation for easy integrating in an automation system.
With stardard spareparts supplied by globally renowned brand, reduce your maintenance cost.
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;