Author:adams8846 Oct. 31, 2026, 2:04 a.m.
SWITEK HEAVY DUTY ROBOTIC ARMS
The YIZUMI D1S series of two-platen injection molding machins is an injection molding machine designed for the ultra-large size plastic parts with a clamping force starting from 5500kN up to 40,000kN, which is widely applicable to deep-cavity parts, household appliances, logistics materials, auto parts etc. With a payload up to 75kg, the SWITEK SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the YIZUMI D1S sreies of two-platen injection molding machine in the projects named above.
Quick response hydraulic cylinders, synchronized lock nut mechanism, differential fast mold opening, precision movable platen supports, low-resistance hydraulic circuit design and high-response servo system enable the machine to operate more efficiently and response faster.
High-rigidity clamping unit, uniform stress distribution on tie bar threads, high-response dual proportional valve, smart closed-loop control, precision filter and efficient cooling system enable the machine to be more precise and stable for injection molding.
The moveable platen has zero contact with the tie bars, also the clamping cylinder is assembled on the fixed platen, thus there is little load for moveable platen and less resistance could be caused during mold opening and closing, more energy saving. What's more, new-generation oil cooling servo system and PID temperature control are equipped to make machine more energy-efficient.
Compact design, automatic tie-bar extraction device for option to ensure machine is not limited by the height of workshop.
D1S series adopts Austria's KEBA control system, with double CPUs, enabling fast response and various functions. New processes like MuCell, ICM (Injection compression molding), IMC (In-Mold-Coatings) can be integrated.
Quick response hydraulic cylinders, synchronized lock nut mechanism, fast and stable mold opening.
The full closed-loop function for injection control and PID temperature control ensure repeatability of part weight <0.3%.
With the low-resistance hydraulic circuit and pressure sensor, even three pieces of A4 paper can be sensed. Low-pressure mold protection is more reliable and sensitive.
The tie bars adopt the uniform stress technology thus each thread is evenly stressed without unbalanced loading, durable and reliable. And it needs no lubrication, be cleaner.
Fast response and high repeatability thanks to the high-response dual proportional valve control technology, which can meet strict requirement from automatic picking.
New-generation oil cooling servo system is stable, reliable and durable and characterized by high efficiency, energy saving, low noise, strong power and fast response.
Impact-cushioning synchronized lock not closing is fast and more reliable with low noise.
Mold opening under high pressure for standard. Large opening force can solve molding problems of deep-cavity products or car lights which are strongly coated on mold or have difficult in mold opening.
Long movable platen supports and L-shape guide rails on machine frame facilitate high load-bearing,guide capacity, and anti-roll adjustment.
Tie bars are highly-rigid and resistant to wear and corrosion. Uniformity of stress distributed on tie bar threads is over 99% without unbalanced force, bringing durability.
Repeatability of injection end position up to ±0.2mm or less and repeatability of part weight ≤0.3%.
Linear guide rails are a standard feature of DIS series, bringing benefits of low resistance, quick acceleration and stable injection.
Ultrasonic displacement sensor for position measurement is characterized by little signal interface, long service life and high accuracy of measurement.
With the use of durable ceramic heater bands and adaptive PID control performed by the Austrian controller, temperature control accuracy is up to ±0.5°C.
The fully oil-cooled two-headed motor-driven servo system is the quintessence of highly-integrated servo pump system. It eliminates the influence of instability in machine operation due to the work environment and further reduces energy consumption of hydraulic circuit. Synchronized drive technology makes hydraulic circuit response faster and movements more efficient.
With independent hydraulic circuit filtration system, filter fineness is up to 5mu;m and cooling effect is optimized, which ensure long service life of seals. Machine becomes more stable.
L-shape plates are easy to install and can be opened directly so that there is open space for more efficient maintenance of the drive system.
The electrical enclosure is designed with IP54 rating, resistance to water and dust and good cooling effect, so that the electrical system is more stable in operation.
External separate powe control without opening the electrical cabinet makes operation safer and more convenient.
Euromap 12 robot interface is a standard feature, meeting customer's need for safer connection.
The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine form 500T~4000T, the features of the SW7 series servo robot include:
| No. | Name | SW7518DS | SW7522DS | SW7725DS | SW7730DS |
|---|---|---|---|---|---|
| 1 | X1 | 1785mm | 1785mm | 2250mm | 2250mm |
| 2 | X2 | 1320mm | 1680mm | 1720mm | 1720mm |
| 3 | Y | 1800mm | 2200mm | 2500mm | 3000mm |
| 4 | Z | 3120mm | 3120mm | 4000mm | 4000mm |
| 5 | YM1 | 500mm | 650mm | 680mm | 780mm |
| 6 | YM2 | 1300mm | 1550mm | 1520mm | 2220mm |
| 7 | W | 2480mm | 2850mm | 3005mm | 3005mm |
| 8 | L | 4160mm | 4160mm | 5050mm | 5050mm |
| 9 | H | 2650mm | 2830mm | 3200mm | 3440mm |
| 10 | Hs | 700mm | 700mm | 900mm | 950mm |
| 11 | Payload | 15kg | 15kg | 50kg | 75kg |
Loginand submit your comments
No Comment by Now