The AOTAI WELLISH Z series of two-platen injection molding machins is an injection molding machine of compact, versatile designed for everything
from large items to high-precision parts, maximizing plant space and efficiency with a clamping force starting from 6800kN up to 30,000kN, which
is widely applicable to deep-cavity parts, household appliances, logistics materials, auto parts etc. With a payload up to 75kg, the SWITEK
SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the AOTAI WELLISH Z sreies of two-platen injection
molding machine in the projects named above.
The Features of AOTAI WELLISH Z Series Two-platen Injection Molding Machine
Clamping Device Function
Fore and real template is optimizated with frame design and high rigidity.
Open and close the mold, the rear template is high speed parallel moving with the double cylinder.
Tie bar is positioned by fore template & direct clamping by high pressure synchronous cylinder.
Rear template has the multifunctional device of mold ejector & hydraulic mold with core pull interface.
Multilevel speed of mold open and cole/high response of linear position sensor with self-diagnosis & control.
Proportional control of clamping force & automatic detection and correction of each status.
Mold protection with low pressure & safety maintenance of the mold's installation and removal.
The chain safety protection function combine with the mechanical, electrical and hydraulic.
Injection Device Function
Double cylinder balance injection & holding pressure by proportional control.
Multi-selection of forward and backward of injection carriage.
Screw is driven by high torque hydraulic proportional back-pressure with multistage detection.
Automatic start protection function to prevent cold material in the screw and barrel.
Screw charging with the flux leakage protection control.
PID controls the heating of barrel & automatic balance function of setting temperature.
Injection measure is with repeating precision/high response liner position sensor with self-diagnosis & control.
Hydraulic System
High response of hydraulic & logic throughway module in medium and large machine.
Servo (high-level energy saving) drive of hydraulic and closed-loop system in real time.
High speed of mold open and close by hudraulic proportional & fast response and multilevel control.
Setting constant temperature of the hydraulic oil/automatic alarm of temperature difference.
Installing bypass oil filter & detection of the rated hydraulic level.
Control System
Multi category of foreign language in storage, can be selected easily by touch screen.
Multi-function and high response controller with specific software & program & high level of colorful touch screen.
The HMI by real-time pages & signal detection of ultra high speed processor.
Why is SWITEK SW7 Series Servo Robot One of the Best Robot for AOTAI WELLISH Z Series of Injection Molding Machine?
The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine
form 500T~4000T, the features of the SW7 series servo robot include:
Kick-back design, providing 30% more EOAT moving space, which is the best solution for deep cavities or large size containers picking.
With payload up to 75kg, promise a stable picking of the large size or deep cavity containers.
Easy installation with a A/C servo posture for parts picking from a complex structure designed mold.
Rich I/O reservation for easy integrating in an automation system.
With stardard spareparts supplied by globally renowned brand, reduce your maintenance cost.
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;