The CHEN HSONG SM-TP series of high-end two-platen injection molding machins is an injection molding machine of compact, versatile designed for everything
from large items to high-precision parts, maximizing plant space and efficiency with a clamping force starting from 7000kN up to 65,000kN, which
is widely applicable to deep-cavity parts, household appliances, logistics materials, auto parts etc. With a payload up to 75kg, the SWITEK
SW7 series 3 axis servo robotic arm is one of the best choice for the picking of the parts from the CHEN HSONG SM-TP sreies of two-platen injection
molding machine in the projects named above.
The Features of CHEN HSONG SM-TP Series Two-platen Injection Molding Machine
IN GENERAL
The Fastest Clamping Unit Available: 750mm/sec
Extremely fast clamp movements (8 seconds dry cycle for SM220TP) significantly shorten cycle time.
Patented Tie-bar/Hydraulic Connection
Reduce stress concentration and greatly simplifies maintenance
Extra feeding temperature control zone
Tri-colinear bearings ensure perfect alignment
Nozzle tip can be moved beyond the fixed platen by up to 300mm
All screws have L/D ratio of 1:22 for optimal melt quality
Patented Inter-lock Mechanism
Combines high speed and silent operation with extremely high precision and rock-solid reliability.
SECOND GENERATION SERVO-DRIVE SYSTEM
Energy Saving
Saves up to 80% of electricity compared to traditional fixed pump systems.
Ultimate Response
Response speed is more than double of a variable displacement pump
Ultimate Precision & Repeatability
Up to 0.5% repeatability even under extremely low speed & prolonged holding conditions.
Long Operational Life
Low oil temperature conserves cooling water and reduces the need for hydraulic oil, thus extending the useable lives of hydraulic parts.
Mix-and-Match with Unparalleled Flexibility
Exclusive Patented Circular Platen
Even stress distribution to molds - improves production stability and part quality
More uniform stress distribution helps extend mold life
Enhanced stiffness and structural integrity makes this design suitable for all molding applications
High-Response Two-Platen Specific Controller
15-Inch LCD Intelligent Controller
Meets Various JIS and IEC Inspection Standards
Integrated High-Speed Communication Bus and Closed-Loop Control Function
Equipped with Intelligent Fault Detection and Assisted Operation Instructions
Online Operration Help Guide / On-Screen Operation Assistance
Supports Latest Industrial 4.0 Networking
Why is SWITEK SW7 Series Servo Robot One of the Best Robot for CHEN HSONG SM-TP Series of Injection Molding Machine?
The SWITEK SW7 series of servo robot a heavy duty robotic arm with a starting payload from 15kg and up to 75kg and is suitable for injection molding machine
form 500T~4000T, the features of the SW7 series servo robot include:
Kick-back design, providing 30% more EOAT moving space, which is the best solution for deep cavities or large size containers picking.
With payload up to 75kg, promise a stable picking of the large size or deep cavity containers.
Easy installation with a A/C servo posture for parts picking from a complex structure designed mold.
Rich I/O reservation for easy integrating in an automation system.
With stardard spareparts supplied by globally renowned brand, reduce your maintenance cost.
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;