High Speed Picking Robot for BORCHE BD380 All Electric Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 5, 2026, 2:19 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The BORCHE BD380 is an all electric injection molding machine designed for the clean production of medical parts, food packages etc. With a clamping force up to 3800kN, the BD380 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of BORCHE BD380 All Electric Injection Molding Machine

  • FAST: double efficiency
    • Quick response: injection response time less than 50ms
    • Fast mold open & close: 500mm/s
    • Overlapped movement: production time shortened by 30%
    • Fast cycle time: dry cycle decreased by 20%
  • INTELLIGENT: intelligent connection

    BD series machine can interconnect with injection molding machine and the peripherals via Plascloud, complete two-way data communication, and realize the information and digital management of injecdtion molding plants.

  • ACCURACY: quality guarantee
    • Repeatability precision of product weight increased by 3 times
    • Repeatability precision of injection position increased by 10 times
  • ENERGY SAVING
    • Energy saving by 30%
    • Low water consumption
    • Raw material saving: low product defects
    • Low oil consumption, 80% less than hydraulic machine
  • Direct Drive Technology for Mold Open and Close

    The ball screw is driectly used as the rotor and shaft of servo motor, making the transmission more accurate and the transmission efficiency up to 99.99%. No synchronous belt,free maintenance and low noise.

  • Four-in-one Control Technology

    Quick response servo motor with full independent intellectual property rights, high performance servo driver, new generation of intelligent controller and BORCHE's unique intelligent electronic control technology, can better meet various injection molding application needs.

  • Direct Drive Technolgoy for Injection

    The ball screw is directly used as the rotor spindle of servo motor, leaving out the connection of the intermediate parts making the consistency of the action reach 100%, and reducing the interia of the motor to improve the motor injection response speed.

  • Bigger opening stroke better for deep-cavity products and automatic production
  • No contact between moving platen and tie-bar makes a more clear mold open and close area
  • Optimized design, higher platen rigidity, less platen deformation
  • Temperature sensors on hopper throat and transmission throat
  • The injection unit adopts the integrated frame structure to improve the overall rigidity, which ensures the coaxiality of the screw and the high accuracy of plasticizing and injection.
  • The moving parts of mold opening and closing are guided by linear guide rail, with low friction resistance and more energy saving, which can reduce the wear rate and improve the parallel and vertical accuracy of platens.
  • Increased tie-bar distance for big molds
  • T-slot with hole-threaded platen makes mold loading and unloading more easy
  • The moving parts of injection unit are guided by linear guide rail with low friction resistance, which can improve the system response speed and back pressure control precision.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for BORCHE BD380 All Electric Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the BORCHE BD380 all electric injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right