High Speed Picking Robot for PowerJet KF380-S8 High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 5, 2026, 3:01 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The PowerJet KF380-S8 is a high speed hydraulic injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3800kN, the PowerJet KF380-S8 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of PowerJet KF380-S8 Injection Molding Machine

  • More Optional Units for Faster Thin-wall Containers Injection Molding Available
    • Servo motor and variabe-pump
    • Closed-loop pump
    • Synchronous charging & mold opening
    • Servo valve positioning for mold opening
    • Servo valve & accumulator injection
    • Synchronous ejection & mold opening
    • Special screw for PC
  • Special Features for Thin-wall Containers High Speed Injection Molding
    • Low temperature injection molding to prevent a crispy parts and energy-saving.
    • Low pressure for a perfect formed parts, raw materials saving and better protect your mold and the injection molding machine.
    • Faster response speed, to achieve the best injection speed in 0.3s.
  • Brandnew 3-platen clamping design, which will optimize the stress distribution and has higher rigidity and more stable performance, meeting the demand of rapid mechanical movenent.
  • The linear displacement transducer for inejction and clamping is non-contact mode, suited to be rigidity requirements of high-speed operation, higher precision and higher durability.
  • The standard configuration of multi-sets of air blowing is designed specially for fast cycle production.
  • Innovative design of plasticizing system achieves low-temperature injection; it makes the machine energy-saving, environment friendly and manufactures products with high tenacity and touchness.
  • Advanced hydraulic system achieves low pressure injection; it makes the machine gain better mechanical protection, have longer mold service life, and manufactures products with low stress and deformation.
  • Optimized control system achieves fast response speed; it makes the machine obtain higher shot rate in a short time and reaches the best within 0.3 seconds.
  • Injection movement structure of duplex pull rods can consolidate location and have more precise centering.
  • Special oil-circuit design greatly improves the injected acceleration & movement, full range of oil connection technology, durability is improved.
  • Unique single cylinder injection, faster and more stable injection rate, can meet the needs of the multi-cavity thin wall products.
  • Low resistance linear guide rail, positioning precision, fast response, high repeatability.
  • New rigid frame and better shock-absorbing guarantee more stable production. Reducing the hight of framework to fit for low workshop and products can be taken easily.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for PowerJet KF380-S8 High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the PowerJet KF380-S8 injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right