High Speed Picking Robot for Sumitomo Demag Systec 350/720-1450SP Hybrid Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 5, 2026, 7:56 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The Sumitomo Demag Systec 350/720-1450SP hybrid injection molding machine designed for the fast injection molding of thin-wall containers, medical parts etc.. With a clamping force up to 3500kN, the Demag Systec 350/720-1450SP is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of Sumitomo Demag Systec 350/720-1450SP Hybrid Injection Molding Machine

  • IN GENERAL
    • Systec C SP injecdtion moulding machines with hybrid drive concept are optimised for maximum performance and energy efficiency.
    • Thanks to their rugged construction, Systec C SP machines will reliably deliver excellent results over many years of production — with minimum maintenance costs.
    • Integrated active Motion Control drive technology ensures high dynamics, precision and availability, every day, and for many years to come.
    • Based on the El-Exis SP, the Systec C SP's new machine concept was tailored to accommodate the exacting requirements of the packaging industry.
    • The optimised NC5 plus control ensures easy and intuitive handling.
  • EFFICIENCY: Energy-efficient Servo Drives and Injection

    With its hybrid drive conept using servo drives (Active Drive), the Systec C SP is optimized for maximum dynamic and precise performance and highest energy efficiency and realizes up to a 60% energy saving during operation.

  • HIGHLY DURABLE DESIGN

    Robust and durable machine manufacture that is what the toggle provides. The mechanical conversion ensures highest level of dynamics and working speed with minimal energy consumption and secure locking without any additional energy requirement. The central application of force and the high rigidity have reliable effects in the centre of the platen. The forceful kinematics of the double toggle ensures short locking times and strong opening forces. Particularly in the final positions, the large ovement of the toggle is countered by a relatively small movement of the clamping platen, meaning that the opening and closing procedures are undertaken in a very sensitive manner.

    Mold Safe

    The linear guides of the movable platen with guidance carriages mounted on roller bearings ensure minimal losses through friction and optimal platen parallelism with their wide guidance base and accessible side rails, even with heavy moulds. Lubricant-free columns also cut maintenance costs. The technology of the linear guides therefore helps ensure, in addition to low energy consumption, minimal mould wear.

  • INDUSTRY 4.0 READY

    OPC Unified Architecture is a semantic communication protocol that is becoming more widespread in modern automation technology. It shall allow the data exchange between the host computer and injection moulding machine. Another function is the possibility to connect different devices with each other.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for Demag Systec 350/720-1450SP Hybrid Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the Demag Systec 350/720-1450SP injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right