High Speed Picking Robot for DKM-400H/HH High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 5, 2026, 9:15 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The DKM-400H/HH is a high speed injection molding machine designed for the fast injection molding of thin-wall containers, medical parts etc.. With a clamping force up to 4000kN, the DKM-400H/HH is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of DKM-400H/HH High Speed Injection Molding Machine

  • HIGH PRECISION INJECTION (Controller & Structure)
    • Configure European advanced controller, to precisely control the temperature and location.
    • In hydraulic unit, configure precision servo-valve, it runs with high precision, and response faster.
    • In injection unit, DKM-400H/HH configures linear slider avoids the barrel drop down and ensures the injection stable and precise.
    • High rigidity clamping mechanism platen for even clamping.
    • Screw L/D=22-24, and screw with double thread mixing, that ensure full material mixture.
  • HIGH SPEED
    • Machine adopts high precision single cylinder injection system, especially suitable for high speed injection, with low-inertia and high response speed.
    • Machine adopts accumulator to realize high speed injection, the max injection speed can reach 300-600mm/sec (according to different machine model).
    • Machine ACC/DEC response time can reach 30ms.
  • HIGH EFFICIENCY-clamping unit
    • Toggle with optimized design, perfect combination of speed and force, it is 10%-20% faster.
    • With servo-motor for material charging, compared with hydraulic motor, it can save energy consumption and control the position more precisely at the same time.
    • Standard machine can realize material charging, mould opening and ejector at the same time, saving cycle time.
  • HIGH SAFETY-hydraulic unit
    • Mechanical, hydraulic, electrical triple protection.
    • Security module independent control, it ensures safe machine closing, injection, charging, nozzle forward to machine to avoid any accident.
    • Concealed mechanical safety structure for high security.
    • Fully closed machine frame.
  • HIGH ENERGY SAVING - injection unit
    • With high-response servo system, machine runs accoring to actual need, no overflow or waste, saving power 30%-70%.
    • Optional infrared Nano heating ring, less heat dissipation, more energy saving.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for DKM-400H/HH High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the DKM-400H/HH High Speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right