High Speed Picking Robot for Golden Eagle GEK380W/S-III High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 6, 2026, 8:23 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The Golden Eagle GEK380W/S-III is high speed hydraulic injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3800kN and an opening stroke of 660mmm, the GEK380W/S-III is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of Golden Eagle GEK380W/S-III High Speed Injection Molding Machine

  • GEK380W/S-III servo energy-saving injection molding machine installed with high-powered servo motor dynamical control system, make a brand-new revolution of hydraulic injection molding machine come true by improving injection precision as well as saving energy and water in a large scale.
  • The Golden Eagle GEK380W/S-III servo energy-saving injection molding machines are characterized with energy efficiency and environmemtal protection, closed-loop precision, quick response and low noise and so on, at the same time, integrating traditional hydraulic injection molding machine with all electric injection molding machines and leading the trend for injection molding machine development.
  • The Golden Eagle GEK380W/S-III servo energy-saving injection molding machine are your best choice as it will help you to climb another high peak for your undertaking!
  • High Energy Saving: In an ideal working state, compared with conventional injection molding machines, their energy saving can reach 20%-80%.
  • Better Molding Stability: Compared with conventional injection molding machines, repeatability is greatly improved due to servo motor close-loop control.
  • Quick Response: Sensitive servo motor, the response time only 0.05 second.
  • Quick & Low Noise: The machine runs with now noise, and will be much quieter ina low speed.
  • Reliable Holding Pressure: Comparing with electric injection molding machine, the time for pressure holding will be much longer and steady.
  • Oil Temperature Rise Slowly: Servo motor proportionally deliver hydraulic oil based on our needs, it can prevent unnecessary heat being generated, even in some cases does not require cooling.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for Golden Eagle GEK380W/S-III High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the Golden Eagle GEK380W/S-III High Speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right