High Speed Picking Robot for HaiDa HD360K Hybrid Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 7, 2026, 8:39 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The HAIDA HD360K is a hybrid injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3600kN and an opening stroke of 640mmm, the HaiDa HD360K is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of HaiDa HD360K Hybrid Injection Molding Machine

  • INJECTION SYSTEM

    Enhanced twin-cylinder twin-rod injection mechanism has reduced injection return oil pressure and improved injection speed and service life, with dual linear guide double-carriage balancing seat mechanism to enhance accuracy in cylinder positioning. Precise screw has greatly improved injection precision and reduced defect rate. Optional original imported pneumatic nozzles are easy to open and close, with reliable sealing; and adopt reinforced cylinder thickness and high-power heating device to ensure plasticizing efficiency.

  • CLAMPING SYSTEM

    Use high-rigidity thick platen reduce deformation due to mold expanding; optimized five-point toggle clamping mechanism to realize uniform load on platen, with stable and rapid movement. Apply high strength to compression wear-resistant self-lubricating bearing to lock shaft and pull rod to reduce impact and to increase service life; longer platen guide mechanism to have stable platen movement, higher mould opening precision and convenient for robotic arm picking; volumetric rationing dilute oil lubricating to optimize lubrication distribution and to reduce lubrication consumption; pull rod and lock shaft made of enhanced high-quality alloy steel to greatly increase service life.

  • HYDRAULIC SYSTEM

    Use high-speed plasticizing motor and hydraulic components of international famous brands to ensure high-speed and efficient operation with long service time. High response oil circuit and hydraulic valve board modular design and optimized oil circuit layout with non-damping have reduced pressure loss effectively, and improved responsiveness. Optional injection and clamping proportional reversing valves have improved positioning preciion and response speed. With effective and reasonable configuration of servo system, the injection speed is more than two times of ordinary machine. Optional infrared nano heating device has further improved plasticizing quality.

  • CONTROL SYSTEM

    Latest international distributed control system, latest hardware design, intelligent interface with EtherCat CAN communication technology and faster CUP computing speed are specially developed for the whole motor and high speed machine. Application of all-digital communication technology has improved various technical indexes significantly. With more accurate control on pressure and flow. Graphical display of various action and state let users know conditions of machine in a more intuitive way. Reserved internet management system andd energy consumption display can realize remote real-time monitoring and maintenance diagnosis on each injection machine, as well as advanced management such as reasonably arranged by production, etc.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for HaiDa HD360K Hybrid Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the HaiDa HD360K Hybrid injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right