High Speed Picking Robot for LISONG LS380H3 High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 7, 2026, 9:24 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The LISONG LS380H3 is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3800kN and an opening stroke of 1000mmm, the LISONG LS380H3 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of LISONG LS380H3 High Speed Injection Molding Machine

  • Optimized Toggle Unit Design

    Optimized toggle unit design, high speed clamping unit system, optimize platen design,decrease platen deformation, provide more higher bearing capacity of mold.

  • Cam-ring Mechanism

    Simple and precise mold thickness adjusting mechanism ensure auto-correct clamping force, auto-correct clamping force.

  • Multistage Ejector

    Fast ejector action with smooth and steady, easy to install elector rod, whole-process guidance of ejector, realizable impulse type ejector.

  • More Larger Space of Mold

    Reduce the deviationn of platens, extend the working life of pull bars, higher bearing capacity of mold.

  • Large-sized Linear Guide Rail Support

    Reduce the deviation of platens, extend the working life of pull bars, higher bearing capacity of mold.

  • The advanced Control Interface

    High speed microprocessor, human engineering layout, direct menu key access, data image monitoring, self diagnosis and fault detection capacity.

  • Closed-loop PID temperature controller

    Precise temDerature control, excellently stable process control.

  • Efficient Injection Structure

    Uniform load in the screw, increase the plasticizing capacity, low energy consumption, stable structure, make the injection efficiency higher, simple production process.

  • Precise Linear Guide Rail

    Reduce the moving standard deviation in injection process, to ensure the coaxiality of injection.

  • Servo Motor and Drive

    More energy saving, faster response time, high repeatability precision, lower noise.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for LISONG LS380H3 High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the LISONG LS380H3 high speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right