High Speed Picking Robot for HIGHSUN HXH388 High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 9, 2026, 2:10 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The HIGHSUN HXH388 is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3800kN and an opening stroke of 630mmm, the HIGHSUN HXH388 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of HIGHSUN HXH388 High Speed Injection Molding Machine

  • Low-energy Consuption Structural Design
    1. Single-cylinder injection structure greatly reduces the volume and pressure of the returned oil during injection.
    2. Improving the response speed of the machine.
    3. Reducing energy consumption during injection.
  • Super Save-energy

    Saving - 70% savingcompared to ordinary heating brand.

    1. Faster heating rate - 15 mins.
    2. Better heat preservation.
    3. Longer service life.
    4. Easier to install.
  • Clamping Unit
    1. Optimized toggle structure with great stress analysis.
    2. Higher strength.
    3. More stable.
    4. Longer service life.
  • Magnetostrictive Non-Contact transducer
    1. A Revolutionary Innovation.
    2. Non-Contact Measurement: Magnet movement →Ultrasonic time difference → Precise displacement signal.
    Zero Physical Friction:
    • Eliminates mechanical wear.
    Technical Highlights:
    • Accuracy: ±0.005mm (micrometer-level)
    • Lifespan: > 10 million cycles (50 x longer than traditional encoders)
    • Protection Rating: IP67 (resistant to oil, dust, and moisture)

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for HIGHSUN HXH388 High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the HIGHSUN HXH388 high speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right