The HMD368M8-SPIII is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping
force up to 3680kN and an opening stroke of 640mmm, the HMD368M8-SPIII is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and
an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.
The Features of HMD368M8-SPIII High Speed Injection Molding Machine
INJECTION UNIT
Screw & Barrel
Efficiency performance in material feed and high injection precision. Heat-insulated barrel enclosure enhance plasticizing
capacity by minimizing the lose of heat.
Pneumatic Shut-off Nozzle
Optional standard for Swiss brand Herzog shut off nozzle, it has effectively avoid suck-back.
Double Rod for Injection Cylinder
Bi-directional piston rod for injection cylinder.
Low Frication Design
The injection unit use linear guide, to minimize the friction and increase speed when injection.
Injection Speed
Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin-wall products.
CLAMPING UNIT
Platen: Improved platen with high rigidity structure. Especially suitable to thin-wall products.
Cooper Bush: Self-lubrication bushes ensure high-speed performance.
Pink: Nitride link with optimized structure and more robustness and stability.
Tie Bar: Equipped with alloy metallic tie bar with enhance strength to length the lifespan.
HYDRAULIC UNIT
Hydraulic System: Parallel movement of charging on fly drastically shortens circle time. It is a optional selection for parallel
movement of eject on fly.
Hydraulic Motor: High-speed hydraulic motor.
ELECTRIC UNIT
Controller: Adapt Italy INOVA computer, with 10 inch color LED screen, realize the precision and fast reaction.
Electric Element: Contactor and limited switch adapt Omron and Schneider.
Why is SWITEK SW7112DS One of the Best Fast Picking Robot for HMD368M8-SPIII High Speed Injection Molding Machine?
As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages
below make it one of the best picking robot for the HMD368M8-SPIII high speed injection molding machine:
Dry cycle time lowered to 3.3s.
With in mold time lowered to 0.7s.
Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
User friendly interface, easy operating with lower training cost.
With the main components made by big names, lower maintenance cost.
Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.
Parameters of SWITEK SW7112DS High Speed Picking Robot
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;