The JSW J350ADS is an all electric injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping
force up to 3500kN and an opening stroke of 700mmm, the JSW J350ADS is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and
an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.
The Features of JSW J350ADS All Electric Injection Molding Machine
INJECTION UNIT
Open Nozzle (Tip type)/(Injection Units up to 1400H)
N2000F Barrel
Chrome-plated Screw
Injection Unit Swiveling Device (with Limit Switch)
Molding/Purging/Pause Temperature Select
Injection/Metering Programmed Control
IVS Control (Holding Pressure Transffer by Speed Detection)
Barrel Temperature Control (PID)
Synchronous Temperature Rise Control
Hopper Flange Temperature Control
HAVC (High Accuracy Volume Control)
IWCS (Injection Weight and Cushion Stability) Control
Screen Caputure Files can be stored to USB memory device
Pre-heat Timer
Product Takeout Robot Circuit
Attended/Unattended Operation Select
Monitor
Actual Value Dispay
Mold Temperature Display
Injection/Metering Waveform Monitor
Injection/Metering Waveform Storage
Osilloscope Waveform Monitor
Energy Consumption and Regeneration Monitor
Barrel Temperature Monitor
Injection Pressure Monitor (IPM)
Statistical Graph
Production Monitor
Cumlative Operating Hour Display
Molding Condition Upper/Lower Limit Monitor
Inspection and Maintenance Guide
Injection Pressure Overshoot Alarm
Servo Fault Alarm
Grease Lubrication Alarm
Alarm History
Set Value History
Why is SWITEK SW7112DS One of the Best Fast Picking Robot for JSW J350ADS All Electric Injection Molding Machine?
As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages
below make it one of the best picking robot for the JSW J350ADS all electric injection molding machine:
Dry cycle time lowered to 3.3s.
With in mold time lowered to 0.7s.
Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
User friendly interface, easy operating with lower training cost.
With the main components made by big names, lower maintenance cost.
Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.
Parameters of SWITEK SW7112DS High Speed Picking Robot
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;