High Speed Picking Robot for HaiTian MA3800F High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 9, 2026, 9:30 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The HaiTian MA380F is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3800kN and an opening stroke of 700mmm, the HaiTian MA380F is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of HaiTian MA380F High Speed Injection Molding Machine

  • APPLICATIONS OF HAITIAN MA3800F HIGH SPEED INJECTION MOLDING MACHINE
    • Food Packaging

      The MA/F provides a highly efficient and high-quality solution for the plastics packaging products in the fast-moving consumer goods industry. With the maximum injection speed up to 500mm/s, the HaiTian MA3800F high speed injection molding machine can produce thinner, lighter products on a more consistent process. Such as fast food containers, beverage cups, ice cream boxes and disposable tableware, etc. Automated accessories such as product stacking, film packaging, printing and carton packaging are optional.

    • Pharmaceutical Packaging

      For cylindrical products such as cups and medicine bottles, etc., accurate flow control is applied to ensure high quality standards.

    • Civil Product Packaging

      In terms of thin-wall products with long flow length and even mixture, the MA3800F high speed injection molding machine can meet the requirements for shorter cycle and long-term continuous production, while ensuring the high degree of process stability. Application cases include buckets, flower pots, storage boxes, etc.

    • Logistics Packaging

      The HaiTian MA3800F high speed injection molding machine provide more efficient application solutions for price-sensitive market setments, such as cable ties.

  • CLAMPING UNIT — Reliable Toggle and High Efficiency
    • High Rigidity V-type Toggle Mechanism

      The optimized clamping mechanism with diagonal row angles and 5-point toggle adopts the V-type toggle design which ensures the optimal force transmission at the center of the mold mounting area and improves the quick response of the mold opening and closing.

      The use of the brass brushing greatly improves the lubrication between the toggle and the tie bars, which extends the service life of the parts and the decreases the overall cost of ownership.

    • The customized special steel tie bar and reinforced design meet the requirements for fast cycle times and long life.
    • The high-precision proportional directional valve ensures stable and precise positioning of the platen.
    • The zero-leakage mold closing shut-off valve is used to maintain stable clamping force and establish sufficient hydraulic pressure which improves the capability of mold clamping.
    • The redesigned moving platen reduces clamping force deformation.
    • Low-friction linear guides ensure parallelism of the platen while reducing operating energy; The movable platen maintains it's structure which enhances the rigidity and platen parallelism.
  • INJECTION UNIT — High-Speed and High Response

    Optimum Design of Injection Unit
    The twin-cylinder balanced injection unit is equipped with a low-resistance injection cylinder, excellent control system, reliable positioning accuracy, as well as high-speed and high response capabilities. In order to optimize the plasticizing system, a special screw with high plasticizing ability is used to ensure that the melt maintains high quality standars.

    • Strengthened injection platform, reduces deformation during injection and improves the injection precision.
    • Equipped with a precision by-pass filter, it can improve oil cleanliness, reduce the wear of hydraulic components and prolong the service life of hydraulic components.
    • Ultra-high-speed, low-noise and high efficiency new internal gear pump demonstrates a strong output capability.
    • Stable high-speed injecdtion through dynamic balanced twin-cylinder, and linear guide rail support improves accuracy.
  • DATA ANALYSIS — Low Energy Consumption and High Performance
    • Comparison of Injection Speed

      Supported by new servo motors and redesigned gear pumps, the maximum injection speed of the MA3800F is more than 500mm/s. Through optimized hydraulic output, the injection process is stable and controllable.

    • Comparison of Injection Repeatability

      The precision characteristics of the servo motor is paired with that of the internal gear pump, and the closed loop is formed by a high sensitivity pressure feedback sensor. This allows injection repeatability to reach 3%. Compared to a traditional hydraulic circuit the inejection stability with the servo motor and gear pump is greatly improved, and the yield rate is greatly enhanced.

    • Comparison of Power Consumption

      The MA3800F adopts the 6th generation of servo control systems, which brings more energy-saving benefits, and compared to the traditional constant (standard) rate pump the energy-saving efficiency can be more than 50%.

    • Comparison of Water Consumption

      The 6th generation of servo control system allows the servo motor to proportionally output hydraulic oil to avoid excess heat generation and ensures low temperature rise, therefore saving 20%-80% of electricity compared to traditional injection molding machines.

    • Stress Analysis of Platen

      The newly designed platen is specially engineered for packaging products. The finite element software analysis shows that the average deformation is reduced by more than 30% compared to a normal hydraulic injection molding machine, effectively improving the precision of the products.

    • Force Analysis of the Clamping Unit

      The design of the center clamping mechanism, large diagonal row angle and the high rigidity platen are adopted to control the deformation. The MA3800F has very small mechanical deformation and is suitable for thin-walled high-precision product molding.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for Haitian MA3800F High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the Haitian MA3800F high speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right