High Speed Picking Robot for Milacron Q-ACCUPACK 350 High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 11, 2026, 3:53 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The Milacron Q-ACCUPACK 350 is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 3500kN and an opening stroke of 720mmm, the Milacron Q-ACCUPACK 350 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of Milacron Q-ACCUPACK 350 High Speed Injection Molding Machine

  • LOW MACHINE CENTERLINE FOR BETTER STABILITY
    • Machine Base — Rugged

      The Reduced Machine Base Height provide better toggle kinematics during high speed molding. The 3 way part drop provides better access to the molded parts.

    • Upgraded Hydraulics
      • Pump slide out
      • Ergonomics hydraulic layout for easy approach & reduced footprint pic: fixed piping.
      • Valve place near actuators for rapid response.
      • Pre-heating circuit for hydraulic oil.
      • Low oil level audible alarm & motor shut down.
      • Oil tank with butterfly valve pic: butterfly valve for ease of Maintenance.
      • Continuous oil filtration with 10 micron filter.
      • Audible alarm for filter clogging.
      • Hydraulics valve On/Off indication.
    • Clamp &mdash Fast & Precise

      The all new clamp system on the Q-series has been mounted on the LM guideways which provide precise movement with no frictional losses. The clamp system has higher mold carrying capacity, enhanced parallelism and squareness.
      The moving platen design is improved for centrally applied force on the mold thereby ensuring uniform load distribution across the mold face and reduces platen deformation at the center. Minimum clamping force improved to 30% of the maximum clamping force, so you can try more variety of applications with the same precision levels.

  • REDUCED DRY CYCLE TIME — ENHANCED PRODUCTIVITY

    Q-Series Machines also provide smooth mold opening & closing cycles with heavy molds and at high speed. The platen support has been made stronger with 20% less deflection in the part drop area.

    • Tie Bar Distance

      The enhanced tie bar distance helps in accomodating larger variety of molds. The clamp force is centrally applied and uniformly distributed on the mold face thereby ensuring better mold life.

    • Moving Platen on LM Guides
    • Contactless Transducer

      The all new contactless transducer at Crosshead increases reliability against dust & grease thereby ensuring better superior linearity, IP protection & enhanced life.

    • Mold Safety System

      The mold is one of the most critical parts of the injection molding process. The all new Q-Series machines takes care of your mold with mold safety as a standard feature. It's a closed loop control process which senses pressence of left over article from the last process cycle or any foreign article in between the core & the cavity. It's a continuous monitoring system. The control records & analyses the data after every process cycle.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for Milacron Q-ACCUPACK 350 High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the Milacron Q-Accupack 350 high speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right