High Speed Picking Robot for WELLISH HJ400/828 High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 12, 2026, 7:26 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The WELLISH HJ400/828 is a high speed injection molding machine designed for the fast injection molding of thin-wall containers. With a clamping force up to 4000kN and an opening stroke of 700mmm, the WELLISH HJ400/828 is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of WELLISH HJ400/828 High Speed Injection Molding Machine

  • Clamping structure/unit as well as machine bodyis whith high rigidity & high load capacity design, which can ensure machine's stability and durability.
  • Suitable hydraulic system design machines with high response controller, which guarantees the machine with shorter cycle time and achieve high speed/precision function requirement.
  • The WELLISH HJ400/828 adopted oil self-lubricating bushings and good quality steel rod as well as ong lifespan design and manufacture of clamping pins for the machine.
  • Coaxial and high agility single cylinder fast injection structure has greatly improved the plastics melting capacity & plasticizing performance.
  • The machine is suitable for the processing of thin-wall packing and long flow path products, so as to make sure the production efficiency accordingly.

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for WELLISH HJ400/828 High Speed Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the WELLISH HJ400/828 high speed injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right