High Speed Picking Robot for LS WIZ 350E High Speed Injection Molding Machine -- SW7112DS

Author:adams8846 Nov. 13, 2026, 12:56 a.m.

SWITEK HIGH SPEED ROBOT FOR THIN-WALL CONTAINERS

Abstract

The LS WIZ 350E is an all electric injection molding machine suitable for the fast injection molding of thin-wall containers. With a clamping force up to 3500kN and an opening stroke of 720mmm, the LS WIZ 350E is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.

The Features of LS WIZ 350E All Electric Injection Molding Machine

  • IN GENERAL
    • Largest Platen within Same Tonnage
      • New centerpressed rigid platen
      • Extend tie bar distance (80~400Ton): hORIZONTAL 7% ~ 17% UP x Vertical 2% ~ 15% UP compare to previous model
    • Extended Daylight (80 ~ 400Ton)
      • 3% ~ 20% up compare to previous model
    • Increased Injection Volume (18 ~ 350Ton)
      • 13% ~ 27% UP compare to previous model
    • High Speed Injection 500mm/s 18 ~ 400 Ton (Optional)
    • Major Optional Function Applied as Standard
      • Air blow off unit, product chute
      • Ejector retreat confirmation circuit
      • Valve gate circuit
    • Dual Nozzle Touch Cylinder (Zero Moment)
    • Quick Response Load Cell (NMB)
  • STRUCTURE & FEATURE
    • Applying strong & quick response AC servo motor to realize high injection speed
      • Injection speed up to 800mm/s and multi-step injection speed control produced by a high-output and high-response servo motor.
    • 5-Point toggle high speed clamping system and highly rigid injection mechanism
      • 5-point toggle high speed clamping unit and high intensity injection mechanism.
      • High speed injection mechanism by adopting a high-response high-torque servo motor.
    • Servo motor controls individually and simultaneously
      • Platen open during plasticizing/Ejection durong opening planten/Injection during increasing pressure.
      • Reduce cycle time (productivity improvement)
    • High stiffness clamping unit, injection structure (Stable molding)
    • Safety Filling Function Mode
      • Control the peak pressure during injection by screw position
      • Prevent over-filling by the incorrect setting during high speed injection.
    • Center press typed moving platen for precision molding
      • Center Press type prevents bad molding & provides long mold life cycle.
    • Energy recuperation system, Energy saving
      • Recovery the Electricity for injection by 10% during injection speed reduction.
    • Center press moving
      • Improve productivity multi cavity
      • Unity the Euromap ejector (Enhanced modulation)
    • Double shaft nozzle touch structure
      • Prevent platen failing: Platen parallelism improvement & prevent resin leacking
      • Nozzle forward and backword speed increased.
      • Increased user convenience: Simplified barrel.
  • CONTROL SYSTEM
    • Applies KEBA Controllers

      Quick response and user interface reinforcement

      • Easy to conver units
      • Function to serarch data on molds
      • Easy and various graphic functions
      • Users can change the sequence of cycles
      • Possible to communicate with peripheral devices and monitor them
      • An easy-to-analyze cycle monitoring screen
      • Possible to monitor I/O and turn On/Off the forced output on the touch screen
      • Provides operation on convenience for users by increasing the screen size
      • Adds a memo function - possible to make an independent memo and associate with mold information
    • LS CSI Solution (CSI-M/CSI-C)
      • Production and process monitoring of Injection molding machine system (CSI-M)

        Injection system data linkage function for the MES and powerful monitoring solution

        • Mobile device system monitoring
        • Provide multiple connections to LS Mtron machines
        • Status monitoring and controlling function of every linked device
          —Injection machine information, status and set up function
          —Exception: Machine structure and related system data
          →Screw size & maximum stroke remote setting is not provided
        • Interlocked with customer MES
          —Injection production information loading function depend on production plan
          →Prior consultation needed with customer SI team before applying MES interlock system
        • Manager Function: MBO & production plan comparison monitoring
          —Information output based on database analysis
          —Production ratio monitoring (OEE, time/date/monthly)
          —Production information analysis by mode (automatic/preparation/alarm/OFF)
      • Auxiliary equipment control system (CSI-C)

        Injection molding machine centered controlling solution system realize convenience and production improvement

        • Injection molding machine operation panel controlling
          —Equipment parameter setting: major parameter variable and setting function
          —Controlling 64 units maximum
        • Equipment production condition up/down loading system prevent input condition by user
          —Mold bar code scanner linkage to provide injection machine and auxiliary condition loading
        • Alarm checking and alarm logging through operation panel

Why is SWITEK SW7112DS One of the Best Fast Picking Robot for LS WIZ 350E All Electric Injection Molding Machine?

As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages below make it one of the best picking robot for the LS WIZ 350E All Electric injection molding machine:

  • Dry cycle time lowered to 3.3s.
  • With in mold time lowered to 0.7s.
  • Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
  • User friendly interface, easy operating with lower training cost.
  • With the main components made by big names, lower maintenance cost.
  • Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.

Parameters of SWITEK SW7112DS High Speed Picking Robot

Robotic Arm
No. Name SW7112DS
1 X1 950mm
2 X2 720mm
3 Y 1200mm
4 Z 1650mm
5 YM1 425mm
6 YM2 775mm
7 W 1434mm
8 L 2710mm
9 H 1780mm
10 Hs 360mm
11 Payload 2kg

Injection Molding Application Demonstration

Tips of Robot Selecting for Your Injection Molding Machine

Robotic Arm
  • The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
  • The vertical stroke of the robotic arm (Y) will reach the mold center;
  • The EOAT will reach a height over the safe door (D-N);
  • The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
  • The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator side parts dropping);
  • The robot has sufficient payload to load the right EOAT for parts picking;
  • To install an A/B/C servo posture for the parts picking from a complex structure mold;
  • The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
  • The robot has sufficient I/O reservation for complex EOAT or automation integration;

Comment

Loginand submit your comments

Comments (0)

No Comment by Now


Automation Solutions of Injection Molding

HuangYanZheng©Copy Right