The ZHAFIR ZE3800F is an all electric injection molding machine suitable for the fast injection molding of thin-wall containers. With a clamping
force up to 3800kN and an opening stroke of 700mmm, the ZHAFIR ZE3800F is suitable for the injection molding production of 700ml beverages up to 8 cavities. With a dry cycle time of 3.3s and
an in mold time lowered to 0.7s, SWITEK SW7112DS is one of the best picking robot for such a project.
The Features of ZHAFIR ZE3800F All Electric Injection Molding Machine
INJECTION UNIT
High plastic screw set
Open nozzle
Barrel heating temperature PID control, SSR
Extended nozzle, temperature PID control independently
Feeding zone temperature closed-loop control
Injection speed 6 steps
Speed responding mode adjustable
Holding pressure 4 steps
Pressure responding mode adjustable
V/P switch over methods by position/time/pressure combinations
Dosing rotation speed 3 steps
Back pressure 3 steps
HPM over-filling protection function
Screw retraction before and/or after dosing
Auto purge
Nozzle sealing force programmable control
CLAMPING UNIT
5-point twin toggle mechanism
Center pressing platen
Clamping force closed-loop control
Automatic mold-height adjustment
Platen moving speed 6 steps
Full stroke mold protection
Clamping force pre-release
Ejector speed 3 steps
Ejector pressure 3 steps
Multi ejection function
Mold cooling water circuit 1 set
FUNCTIONS & CONTROLS
Multi-language available (Chinese, German, English, Japanese etc. )
Metric/Imperial unit selectable
Dosing parallel to mold opening
Injection compression
Production assistant device function
Maintenance alert
5000 cycles process data recording
Amendment report
Alarm record
Quality control function
Mold profile data memory (up to 200sets)
3 USB interface
USB printer interface
Injection speed & pressure curve
1 free programmable I/O
Mold ejector protection interface
EUROMAP 12 interface for handling device
Auxiliary socket 3PH/380V 32Ax1, 16A x 2
3 color alarm lamp (red/yellow/green)
Why is SWITEK SW7112DS One of the Best Fast Picking Robot for ZHAFIR ZE3800F All Electric Injection Molding Machine?
As a high speed 3 axis servo robotic arm designed for the fast picking of thin-wall containers from the injectin molding machine, the advantages
below make it one of the best picking robot for the ZHAFIR ZE3800F All Electric injection molding machine:
Dry cycle time lowered to 3.3s.
With in mold time lowered to 0.7s.
Suitable for injection molding machine with clamping force from 2000kN to 5000kN.
User friendly interface, easy operating with lower training cost.
With the main components made by big names, lower maintenance cost.
Optional EU12/EU67/JIS interface, easy connection to the injection molding machine.
Parameters of SWITEK SW7112DS High Speed Picking Robot
Tips of Robot Selecting for Your Injection Molding Machine
The height of the robotic arm + the height of the injection molding machine < the height of the crane L;
The vertical stroke of the robotic arm (Y) will reach the mold center;
The EOAT will reach a height over the safe door (D-N);
The crosswise stroke (X2) is sufficient to pick the parts from the movable platen of the injection molding machine;
The traverse stroke (Z) is long enough to place the parts on the conveyor (B+C for operator side parts dropping or A+C for non-operator
side parts dropping);
The robot has sufficient payload to load the right EOAT for parts picking;
To install an A/B/C servo posture for the parts picking from a complex structure mold;
The robot has a correct interface (EU12/EU67/JIS) to communicate with the injection molding machine;
The robot has sufficient I/O reservation for complex EOAT or automation integration;